Orange Coatings LLC · (602) 932-3417 · Get an estimate

Epoxy flooring · Litchfield Park

Epoxy Garage Floors in Litchfield Park, AZ

Published

Orange Coatings installs and replaces epoxy garage floors in Litchfield Park. We take the slab back to clean, sound concrete, repair and profile it, and apply a Sherwin-Williams epoxy floor system with optional decorative flakes, clear topcoat and anti-slip additive.

In a city of established homes, many of the garages we look at already have a coating on them. Often it is peeling, and the real work is getting it off properly before anything new goes down.

Litchfield Park City Hall
Litchfield Park City Hall Photo: Marine 69-71, CC BY-SA 4.0, via Wikimedia Commons (resized)
Quick facts
ZIP code85340
Population6,847 (2020 census)
City sizeAbout 3.3 square miles, 19 miles west of Phoenix
What we installSherwin-Williams epoxy floor systems, with flakes, clear topcoat and anti-slip as options
LicensedROC 365464, plus bonding and insurance

A small city of settled homes

Litchfield Park is small: about 6,800 residents on roughly 3.3 square miles. It began as a company town for the Goodyear Tire and Rubber Company and is named for Paul Litchfield, a Goodyear executive. Today it is known for tree-lined streets, the Wigwam resort and homes that have been lived in for years.

Established homes tend to have garages with a history. Oil soaked into the slab, a DIY floor paint from a previous owner, cracks that have opened and closed through many summers. Each of those changes how the prep has to go.

Mature trees also mean roots, and roots near a garage apron can crack and lift the concrete at the threshold. We look closely at that edge during the estimate, because a lifted lip is where coatings usually chip first.

Signs the old coating has failed

Any one of these usually means the bond is gone in more places than you can see. Painting over it just puts new material on a layer that is already letting go.

A quick check you can do yourself: press a strip of clear packing tape onto the coating and pull it off fast. If pieces come away with the tape, the bond is weak.

  • Patches lifting in the shape of tire tread where you park
  • Edges that flake when you pick at them with a fingernail
  • Blisters or bubbles, often a sign of moisture under the coating
  • Bare gray concrete showing through in traffic lanes
  • Yellowing near the door where afternoon sun reaches the floor
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Taking a failed floor back to bare concrete

  1. Test how well the existing coating is holding across the whole floor.
  2. Remove loose and failing coating, grinding it off rather than spot-scraping.
  3. Degrease the exposed concrete and treat old oil stains.
  4. Fill cracks, pits and divots, and grind the repairs flush.
  5. Check the slab for moisture, and prime with a moisture-mitigating product if needed.
  6. Apply the Sherwin-Williams base coat, flakes if chosen, and the clear topcoat.
  7. Walk the floor with you once it has cured.

Why spot repairs rarely work

It is tempting to patch only the areas that peeled. The trouble is that the surrounding coating usually has the same weak bond, and the patch edges become new places for it to lift. Patches also rarely match in color or sheen.

A full strip and recoat costs more up front, but it gives one continuous bond from wall to wall. We will tell you at the estimate whether the old coating is sound enough to stay or needs to come off.

Dust and noise during removal

Grinding off an old coating is loud and dusty work. Good practice pairs the grinder with a dust-collecting vacuum, keeps the door to the house closed and sealed with tape, and covers anything that has to stay in the garage.

Grinding removes the coating and a thin skin of concrete, which is exactly what the new epoxy needs to bond. It does not weaken a sound slab, though it can uncover pits and cracks the old coating was hiding. Those get repaired before the new coats go down.

Afternoon sun through an open garage door

If your garage faces west and the door stays open in the afternoon, sunlight reaches the first few feet of the floor. Ultraviolet light can yellow some epoxy coatings over time, which is why an old floor is sometimes darker near the door than at the back wall.

Ask about your garage's orientation at the estimate so the topcoat choice fits it. Keeping the door down on bright afternoons also helps the floor and keeps the garage cooler.

A flake blend also hides early yellowing far better than a solid pale color.

Garages that hold more than cars

In many homes the garage also holds the water heater, a laundry setup, a second refrigerator or a hobby bench. Those are spots where water ends up on the floor, so we often suggest the anti-slip additive in that corner even when the parking bays stay smooth.

Before the job, plan where the fridge and freezer will run for a few days, and tell us about anything plumbed in that cannot move. We work around fixed equipment and coat as close to it as the prep allows.

Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job

Pairing the garage floor with the outside

If the garage floor is getting redone, the driveway and patio often look tired next to it. We coat driveways and pool decks as well, so the concrete around the house can be planned together and colored to work with your exterior.

Photos

Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job
Driveway finished with a decorative flake coating in front of a garage
Driveway finished with a decorative flake coating in front of a garage

Frequently asked questions

Can you put new epoxy over my peeling garage floor?
Not over the peeling parts. Failing coating has to be ground off so the new epoxy bonds to sound concrete, and we test the rest of the floor to see what can stay.
Why did the coating in my Litchfield Park garage bubble?
Bubbles and blisters often point to moisture moving up through the slab, or to a coating applied over a dirty or sealed surface. We check for moisture before recoating.
Why is my old garage floor yellow near the door?
Sunlight through an open door can yellow some epoxies over time. Tell us how much sun your floor gets and we will factor it into the topcoat choice.
Do I need to move my water heater or laundry machines?
Fixed plumbing usually stays. We coat around it, and movable appliances like a second fridge come out for a few days.
Is it better to recoat the whole floor or patch it?
In most cases the whole floor. Patches sit next to coating with the same weak bond and tend to lift at the edges.
How far is Litchfield Park from your shop?
We are based in Surprise, a short drive north, and cover the whole West Valley with same-day estimates.
Will grinding off the old coating damage my concrete?
No. Grinding takes off the coating and a thin surface layer, which the new epoxy needs to bond. Any pits or cracks it uncovers are repaired before coating.

Related

Sources