Epoxy flooring · Avondale
Epoxy Garage Floor Coating in Avondale, AZ
Published
Orange Coatings installs epoxy garage floor coatings in Avondale using Sherwin-Williams epoxy floor systems over concrete we clean, degrease, repair and profile first. Optional decorative flakes, a clear topcoat and an anti-slip additive let us fit the floor to how you use the garage.
For a lot of owners here that means working on cars. Oil changes, brake jobs and project cars are hard on bare concrete, and a coated floor makes the cleanup after a weekend under the hood far easier.

| Avondale ZIP codes | 85323, 85392 |
|---|---|
| Population | 89,334 people in 2020; 35,883 in 2000 |
| Location | West Valley, next to Phoenix |
| Coating | Sherwin-Williams epoxy floor system |
| Options | Flake broadcast, clear topcoat, anti-slip grit |
| Contractor | Orange Coatings, ROC 365464, bonded and insured |
A floor for people who work on their own cars
Avondale is home to Phoenix Raceway, and the city has no shortage of people who like to work on cars at home. A bare slab soaks up every drip, and after a few years the stains are part of the concrete. A coated floor keeps fluids on the surface, where a shop towel or a squeegee deals with them.
A coated floor also cuts the concrete dust that settles on everything in an uncoated garage. That matters when you have a fresh paint job, a car under a cover, or parts laid out on the floor during a rebuild.

What garage fluids do to a coating
The clear topcoat is your first line of defense against all of these. Prompt cleanup is the second, and it is what keeps a work garage floor looking good for years.
- Motor oil and gear oil: wipe up and they leave no mark on a clear topcoat
- Gasoline: evaporates fast, but do not let a puddle sit under a leaking tank
- Brake fluid: one of the harsher ones, so clean it up right away
- Battery acid: neutralize and rinse quickly, as acids can etch a finish
- Coolant: slippery and toxic to pets, so mop it up promptly
- Tire shine and silicone sprays: overspray leaves a slick film, so apply them outside
Creepers, floor jacks and jack stands
A smooth clear topcoat is great for a creeper. Heavy anti-slip texture is not, because it makes small creeper wheels drag. In a work garage we often keep the bays smooth and put the anti-slip additive only at the house door and anywhere you wash cars.
Floor jacks with steel wheels can scratch a coating when they roll loaded. Poly or nylon wheels are kinder. Put jack stands on plywood squares or steel plates so a car's weight is spread instead of sitting on four small feet, and never drop a stand or a brake rotor onto the floor.
Older slabs in established neighborhoods
Avondale more than doubled between 2000 and 2020, so newer subdivisions sit next to older neighborhoods in the original part of town. Older garages often have deep oil stains, settled cracks and a layer of floor paint that is already flaking.
We remove loose paint, treat the oil with degreasers until the concrete stops bleeding it back, and fill cracks before profiling. Older slabs and slabs without a vapor barrier also get a moisture check, and a moisture-mitigating primer goes down first if the slab needs it.
Our prep sequence
- Clear the garage and sweep out loose debris.
- Scrape off loose coating and degrease oil-soaked areas.
- Fill cracks and chipped spots so the surface is even.
- Grind or profile the slab, then vacuum the dust.
- Check older slabs for moisture and prime if needed.
- Coat with the Sherwin-Williams base, flakes if wanted, and the clear topcoat.
Questions to ask any epoxy installer
Clear answers to each of these belong on the written estimate, ours included.
- Will the concrete be ground or profiled, or only acid-etched?
- Which product is going down, and how many coats?
- Is there a clear topcoat over the flakes?
- How will the oil stains and old paint be handled?
- Will the slab be checked for moisture?
- When can I walk on it, and when can I park on it?
Light floors make dropped parts easy to find
A dark floor hides oil but also hides the 10 mm socket you just dropped. Light gray or tan bases bounce light up under a car and make small parts stand out. A flake blend on top keeps light floors from showing every tire mark.
Bring your plans for the space to the estimate, such as a lift, a workbench wall or a cabinet run, and we can suggest a color and texture layout that works around them.
Coating through monsoon humidity
From mid-June through September, humid evenings can bring the air close to the dew point on a cool slab. Coating in those conditions can leave a cloudy or tacky surface. We check conditions against the product label before each coat and move the schedule if the numbers are wrong.
Dust storms are the other monsoon problem. A haboob can coat a wet floor in grit within minutes, so we watch the forecast and keep the door down while the coating is wet.

Photos


Frequently asked questions
- Will brake fluid ruin an epoxy garage floor?
- Not if you wipe it up promptly. Brake fluid is one of the harsher garage chemicals, so do not let it sit on any coating.
- Can I use a creeper on a flake epoxy floor with anti-slip?
- Creepers roll best on a smooth topcoat. A common layout keeps the work bays smooth, with anti-slip only near doors and wash areas.
- Can you coat a floor that is soaked with years of oil?
- Usually, yes. It takes heavy degreasing and stain treatment before profiling, and we look at how deep the staining goes during the estimate.
- Will a car lift work on an epoxy floor?
- Lift posts carry heavy loads on anchor bolts set into the concrete, so talk to the lift maker about anchoring before coating. We can plan the coating around where the posts will go.
- How long before I can roll the project car back in?
- Plan on about a day before walking on it and about three before vehicles, depending on the system and temperature. We give you the exact timing for your floor.
- Do you coat driveways in Avondale too?
- Yes. Driveway coatings are one of our services, and it is easy to quote both while we are there.
- Is acid etching enough prep for a garage floor?
- Etching cleans and opens the surface a little, but it does not remove sealers or old coatings and leaves an uneven profile. Mechanical profiling is what a lasting garage floor starts with.