Orange Coatings LLC · (602) 932-3417 · Get an estimate

Custom home painting · Scottsdale

Custom Home Painting in Scottsdale, AZ

Published

Orange Coatings paints custom and luxury homes in Scottsdale to the color and sheen schedule your architect or designer writes, with Sherwin-Williams Emerald Interior and Emerald Exterior on every surface we finish. The job starts with a same-day, in-person estimate, large paint-out samples on your actual walls, and a written quote that lists product, color and sheen before anything is mixed.

Most custom work here falls into two camps. Desert-contemporary homes bring huge flat walls, steel and glass, while Santa Barbara and Spanish-influenced homes bring smooth stucco, wood beams and dark window frames. Each asks something different of a painter, and both are covered below.

Aerial view of downtown Scottsdale, Arizona
Aerial view of downtown Scottsdale, Arizona Photo: Quintin Soloviev, CC BY 4.0, via Wikimedia Commons (resized)
Quick facts
Population241,361 (2020 census)
ZIP codes85250–85264, 85266–85269, 85271
Elevation2,165 ft
Finish paintEmerald Interior inside, Emerald Exterior on stucco and trim
LicenseROC 365464; bonded and insured for custom work
EstimatesSame-day, in person

Desert-contemporary homes: big walls with nowhere to hide

A contemporary build in the north end of the city often has two-story walls, floor-to-ceiling glass and almost no trim. With no casing or crown to break a wall up, every roller lap, sanding scratch and patch is on display, and low winter sun coming through a glass wall rakes across the surface and makes small flaws look large. These homes usually have smooth drywall rather than knockdown texture, and smooth walls forgive nothing.

The fix is prep before paint. We sand, skim-coat where the drywall needs it, prime fresh drywall with a primer made for it, and roll finish coats in long, continuous passes with a wet edge so the wall dries evenly. Flat and matte sheens are common on these walls for a reason: they hide surface variation that eggshell would show.

Long room with a row of windows and floors covered for painting
Long room with a row of windows and floors covered for painting

Santa Barbara and Spanish-style homes: beams, plaster looks and dark trim

Santa Barbara-style homes lean on white or warm cream stucco, clay tile roofs, wood beams, corbels and bronze or black window frames. Inside, walls may be hand-troweled to look like old plaster, with soft hollows and ridges. Rolling a troweled wall takes a thicker roller nap and more brush work, because the hollows have to fill evenly or the color reads blotchy in side light.

Exposed beams need a decision before we quote. Natural or stained beams stay natural, so we mask them tight and cut the wall and ceiling color to the wood. Painted beams get cleaned, sanded, primed and finished like trim, usually a step higher in sheen than the ceiling around them.

How we work from your architect's or designer's spec

If the designer chose colors from another brand, we match them in Sherwin-Williams and confirm the match with a sample on the wall before full gallons are mixed.

  1. Send the color schedule, finish schedule or drawings ahead of the walkthrough if you have them.
  2. At the same-day estimate we walk each room against the spec and flag anything that may not hold up, such as a flat sheen called out for a busy mudroom.
  3. We paint out large samples on the real walls so you and your designer see each color in that room's light, not on a two-inch chip.
  4. The written quote lists product, color and sheen by room and by surface.
  5. During the job you get daily progress updates, and any spec question gets raised before we paint, not after.

Tall great rooms, stairwells and lift access

Ceilings well above the usual 9 or 10 feet are normal in custom homes here, and entry towers, lofts and open stairwells go higher still. How those walls get reached decides how a room is painted and how long it takes. Some rooms work from extension ladders and planks, open stairwells may need a stair platform or scaffold, and a large great room can call for a lift.

We sort that out at the walkthrough and write the access plan into the estimate, because a lift rolling across new stone or wood flooring needs floor protection planned ahead. High walls get the same two finish coats as the walls you can touch, since light from clerestory windows shows a thin coat right at the ceiling line.

Exterior stucco, stone and metal

Scottsdale exteriors usually mix smooth or sand-finish stucco with stone veneer, steel accents, wood soffits and very large glass openings. Our stucco process does not change: wash, repair cracks, prime bare or patched stucco with Sherwin-Williams Loxon masonry primer, then two coats of Emerald Exterior sprayed and back-rolled. What changes on a custom home is how much has to be protected.

At about 2,165 feet the city sits higher than most of the West Valley, but summer afternoons still climb past 100°F. Exterior coats go on in the cooler hours and inside the temperature range printed on the product label.

  • Stone veneer, cast stone and flagstone wrapped and taped so no overspray lands in the joints
  • Bronze and black window frames, steel doors and glass covered before any spraying
  • Natural wood soffits, beams and rafter tails masked separately from painted fascia
  • Pavers, pool areas and desert landscaping under drop cloths
Lap siding painted light gray with darker gray trim around white-framed windows
Lap siding painted light gray with darker gray trim around white-framed windows

A sheen schedule that fits a custom home

Sheen changes how a color reads almost as much as the color itself. A deep tone in flat looks richer and darker than the same tone in satin, so we sample in the sheen that is actually going on the wall.

  • Ceilings: flat, which hides roller marks and glare from big windows
  • Living rooms and bedrooms: flat or matte for a soft look, eggshell where walls get wiped
  • Kitchens, baths and laundry: satin for easier cleaning
  • Doors, trim and built-ins: semi-gloss or high-gloss enamel, depending on the spec
  • Stucco body: the low sheen the spec or HOA calls for

Coordinating with your builder on a new build

On a new custom home, paint sits between drywall, finish carpentry, cabinets, flooring and final clean. We work from the builder's or superintendent's schedule: prime fresh drywall early, come back for finish coats once trim and cabinets are set, then work a punch list before the home is handed over. Exterior paint goes on before final landscaping whenever we can arrange it, so the crew has open access to every wall and new plants never sit under a spray line.

Photos

Long room with a row of windows and floors covered for painting
Long room with a row of windows and floors covered for painting
Lap siding painted light gray with darker gray trim around white-framed windows
Lap siding painted light gray with darker gray trim around white-framed windows
Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job

Frequently asked questions

Will you paint to my Scottsdale designer's color and finish schedule?
Yes. Send the schedule before the walkthrough and we price each room and surface against it. If something on the spec does not suit how a room is used, we raise it with you and your designer before paint is ordered.
Can you paint a two-story great room without damaging new floors?
Yes, with planning. We choose ladders, scaffold or a lift at the walkthrough and protect the floor under any equipment before it comes in. The access plan is written into the estimate.
Do you paint over stone veneer or natural wood beams?
Not unless the plan calls for it. Stone and stained wood are masked before any spraying or rolling, and beams that are meant to be painted get their own prep and enamel coats.
Why does a smooth wall take longer to prep than a textured one?
Smooth drywall shows every patch, sanding scratch and roller lap, especially beside large windows. It needs more sanding, a proper primer and careful rolling, so smooth-wall homes take longer before the first finish coat goes on.
Is Scottsdale within your service area for custom work?
Yes. Scottsdale is one of the areas we serve, and custom projects there get the same same-day, in-person estimate as a job near our Surprise office.
Which Sherwin-Williams products go on a Scottsdale custom home?
Emerald Interior inside and Emerald Exterior outside, with Loxon masonry primer on bare or patched stucco. Our interior coatings are low-VOC, which matters when a family is living in the home during a repaint.

Related

Sources