Exterior painting · Scottsdale
Exterior Painting for Custom Homes in Scottsdale, AZ
Published
Orange Coatings repaints custom and luxury home exteriors in Scottsdale, where large walls, smooth stucco, exposed wood and steel, and design review boards raise the bar on every step. The body gets Sherwin-Williams Emerald Exterior, bare or patched stucco gets Loxon masonry primer first, and every trim line is cut in by hand.
The city had 241,361 residents at the 2020 census and covers about 184 square miles, from older ranch neighborhoods in the south to large desert custom homes in the north. The custom end of that market is where our experience with high-end builds and luxury repaints counts most.

| Population | 241,361 (2020 census) |
|---|---|
| ZIP codes | 85250–85264, 85266–85269, 85271 |
| Elevation | 2,165 feet |
| City slogan | The West's Most Western Town |
| Exterior system | Loxon primer where needed, two coats of Emerald Exterior |
| License | ROC 365464, bonded and insured |
Why custom homes need a different approach
A production home has a few colors and a predictable layout. A Scottsdale custom home may have very tall entry walls, parapets, curved walls, cantilevered roofs, stone veneer, exposed timber, steel railings and walls of glass. Each of those surfaces needs its own prep and its own masking, and the transitions between them are what people notice.
Our custom home work is built around that: careful color consultation, specialty finishes where a design calls for them, and clean cut-in lines wherever two materials meet.
Smooth stucco shows everything
Many homes here use a smooth or lightly troweled stucco finish rather than the heavy sand texture common in the West Valley. Smooth finishes look sharp but reveal every patch, crack repair and lap mark. Repairs have to be feathered and textured to blend with the surrounding wall, then primed with Loxon so they do not flash through the finish. Hairline cracks get a paintable elastomeric caulk worked flat to the surface, since a raised bead stands out on a smooth wall.
Sheen choice matters more on smooth walls, too. A lower sheen hides minor waves in the plaster, while a higher sheen makes them stand out in the low-angle light at sunrise and sunset.
Wood beams, steel and stone
On a large custom home, the masking and hand work can take as long as painting the walls.
- Exposed wood beams and rafter tails: scraped, sanded and finished to suit the wood and the design
- Steel railings, gates and fascia: rust treated, primed and brush-finished
- Stone and unpainted masonry: fully masked so no overspray lands on it
- Windows and glass walls: wrapped in plastic before any spraying starts
- Entry doors and garage doors: finished by hand in the specified color

Design review and HOA color rules
Many communities in the city, especially the guard-gated developments up north, have design review committees that approve exterior colors. Get the approved palette and submit your selections before the job is scheduled.
We match each selection to its exact Sherwin-Williams code, cross-match colors specified in other brands, and put a sample on the actual wall so you and the committee can judge it in real light.
Color, light and heat on big walls
The sun here is as hard on paint as anywhere in the Valley, and big flat walls show fading more than small ones. Deep charcoal and near-black exteriors are popular on contemporary homes, but dark colors absorb more heat and fade faster. If you want a dark scheme, use it where it counts, such as accent volumes or trim, and count on Emerald Exterior for color retention.
Light reflectance value, or LRV, is a useful number to check on a color card. Colors with a higher LRV reflect more sunlight and keep the wall cooler.
Protecting pools, hardscape and landscaping
Luxury exteriors sit next to expensive surroundings: pools and spas, travertine and pavers, outdoor kitchens, fire features, lighting and mature desert landscaping. Overspray or a dropped brush on any of those costs far more to fix than the paint job itself. Before spraying, we cover hardscape with drop cloths, wrap fixtures and outdoor appliances, and mask the pool edge on any wall close to the water.
Spraying also depends on wind. On a breezy afternoon, we switch to rolling and brushing near sensitive areas or move to a sheltered side of the house, rather than risk drift onto a neighbor's car or your pool.
How a larger project is planned
Big homes take more planning. The in-person estimate covers every elevation, the specialty surfaces and the access we need, and it ends with a detailed written quote. Before work starts we confirm the start date, finalize colors and products, and source all materials so nothing holds up the job. During the work you get daily updates, and anything unexpected, like hidden wood damage, is flagged right away. The last step is a full walkthrough with you, with touch-ups handled on the spot.
Photos



Frequently asked questions
- Do you take exterior jobs in Scottsdale even though you're based in Surprise?
- Yes. Scottsdale is one of the areas we serve for exterior and custom home painting, and estimates there are done in person, the same as everywhere else.
- What paint do you use on luxury exteriors?
- Sherwin-Williams Emerald Exterior, the top exterior line in the brand, over Loxon masonry primer where stucco is bare or patched. We do not swap in mid-grade products on custom homes.
- Can smooth stucco be repainted without the patches showing?
- Yes, with care. Patches are feathered and textured to match, primed so they do not flash, and the walls are finished in a sheen that suits smooth plaster.
- Will you work with my designer or architect on colors?
- Yes. Bring their specification, and we will match it to Sherwin-Williams codes, sample it on the wall and confirm it before the crew begins.
- Is a dark exterior a bad idea in the desert?
- Not necessarily, but it needs more care. Dark colors absorb more heat and fade faster, so they work best on smaller areas or on homes where you plan to repaint sooner. A top-tier paint helps them hold color longer.
- Do you paint the wood beams and steel too?
- Yes. Exposed beams, rafter tails, steel railings and gates are prepped and finished as part of the exterior, with products suited to each material.
- Which Scottsdale ZIP codes do you work in?
- We take exterior work across the city, from 85250 through 85264, 85266 through 85269, and 85271. Older ranch homes in the south and large custom homes in the north both get the same prep-first approach.