Orange Coatings LLC · (602) 932-3417 · Get an estimate

Driveway coatings · Arcadia

Driveway Coatings and Sealing in Arcadia, Phoenix

Published

Orange Coatings seals and coats driveways in Arcadia, the Phoenix neighborhood at the foot of Camelback Mountain. Here the concrete has to be checked for moisture first, because irrigated lots and mature citrus can keep a slab damp enough to make a coating fail. Once the slab passes, we clean, repair and apply a Sherwin-Williams sealer, stain or decorative color coating.

Arcadia is also full of remodels and rebuilds, which often leave a new driveway section poured right next to concrete that is decades older. A well-chosen finish can tie them together.

Arizona Falls on the Arizona Canal, near Arcadia in Phoenix
Arizona Falls on the Arizona Canal, near Arcadia in Phoenix Photo: Alan Levine, CC BY 2.0, via Wikimedia Commons (resized)
Quick facts
LocationSouth foot of Camelback Mountain, Phoenix
BoundariesRoughly 44th to 68th Street, north of the Arizona Canal up to Camelback Road
NeighborsBorders Paradise Valley and the Biltmore area, with Scottsdale to the east
Check firstSlab moisture and efflorescence
CoatingsSherwin-Williams sealers, stains and decorative color coats
EstimatesOn site, quote in writing the same day

Irrigated lots and damp concrete

Arcadia runs from 44th Street to 68th Street between Camelback Road and the Arizona Canal, and the neighborhood grew out of citrus groves. Many lots are still large, green and heavily watered, and some still take flood irrigation. All that water moves sideways through the soil and up into nearby concrete.

A driveway that looks dry on top can still hold moisture underneath. Coatings and sealers that go onto damp concrete can blister, cloud or lose their bond, so we look for signs of moisture before recommending anything. A simple test, taping a square of plastic to the slab and checking for condensation under it, tells a lot.

Efflorescence: the white bloom that undoes coatings

When water passes through concrete and evaporates at the surface, it leaves dissolved salts behind as a white, powdery crust. That is efflorescence, and on Arcadia driveways it often shows up along the edges next to lawns and beds, in cracks and at the low end of the slab.

A coating applied over active efflorescence can be pushed off from below as salts keep arriving. The fix is to clean the deposits, reduce the water reaching the slab where possible, and choose a breathable product if moisture cannot be fully stopped.

Old slab, new addition

Mid-century ranch houses in Arcadia are regularly expanded or replaced, and the driveway is often widened, extended or partly re-poured as part of the work. Fresh concrete next to sixty-year-old concrete never matches: different color, different texture, different absorption.

Options, from lightest to heaviest:

If the remodel is still underway, ask your builder to keep the new pour's finish texture close to the old one. Matching broom direction and texture makes any of these options look better at the end.

  • Clean and seal everything clear, accepting some difference between old and new
  • Use a stain to pull the two closer in tone while keeping the concrete look
  • Apply a solid-color coating over both for one uniform surface
  • Let new concrete cure for the time the product label requires before any of these

Citrus roots and lifted panels

Old citrus and shade trees planted near the drive send roots under the concrete, lifting panel edges and opening cracks. A coating can fill and hide fine cracks, but it cannot flatten a raised edge. Panels with a step or a tilt need concrete work first, and we will tell you plainly at the estimate which areas are ready to coat.

Fallen fruit is the other citrus problem. Oranges and grapefruit that split on the driveway leave sticky, acidic juice that etches some sealers and attracts dirt. Picking up dropped fruit quickly and rinsing the spot keeps a sealed or coated surface looking even.

Decorative finishes for remodeled homes

Arcadia sits between Paradise Valley, the Biltmore area and Scottsdale, and many of its rebuilt homes are finished to the same standard. Owners usually want the driveway to look designed rather than just clean. A color coating chosen to match stone veneer, a stained finish that reads warm against white stucco, or a satin sealer that brings out an exposed aggregate surface are all options we can talk through.

Low-sheen finishes tend to suit both the modern farmhouse and desert-contemporary styles common in new builds here, and they keep better grip when sprinklers wet the slab.

Driveway finished with a decorative flake coating in front of a garage
Driveway finished with a decorative flake coating in front of a garage

Our process for an Arcadia driveway

  1. Call (602) 932-3417 or request a quote.
  2. Same-day estimate on site: we check moisture, efflorescence, cracks and old coatings, then write the quote.
  3. Choose the finish and color; we schedule around irrigation and weather.
  4. Prep day: pressure washing, stain treatment, crack and joint repair, efflorescence cleanup.
  5. Application early in the day, then 48 to 72 hours before cars return, depending on product and temperature.
  6. Final walkthrough and cleanup.
Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job

Plan irrigation around the job

Turn off or redirect sprinklers that hit the driveway a few days before we start and keep them off until the coating has cured. If your property takes flood irrigation, tell us the schedule so the work does not land right after a watering. Monsoon storms, June 15 to September 30, get the same attention.

Photos

Driveway finished with a decorative flake coating in front of a garage
Driveway finished with a decorative flake coating in front of a garage
Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Frequently asked questions

Why did the sealer on my Arcadia driveway turn white and peel?
The usual cause is moisture: water coming up through the slab from irrigated soil, or sealer applied while the concrete was still damp. We check for moisture and efflorescence before choosing and applying a new product.
Does flood irrigation affect a driveway coating?
It can. Water spreading through the soil keeps nearby concrete damp, which can push salts to the surface and weaken the bond. Let us know your irrigation schedule so we can plan the work and pick a suitable product.
Can you make my new driveway extension match the old concrete?
A clear sealer will not hide the difference. A stain narrows it, and a solid-color coating makes the whole driveway one color once the new concrete has cured long enough.
Is Arcadia too far from Surprise for a driveway estimate?
No. Arcadia is on our list of service areas, and the estimate happens in person at your home. Call (602) 932-3417 to set a time.
Will a coating fix the panels my citrus tree roots lifted?
No. Raised or tilted panels need concrete repair first; a coating only follows the surface. Once the concrete is level, we can coat the whole driveway so the repaired areas blend in.

Related

Sources