Pool deck coatings · Arcadia
Pool Deck Coatings in Arcadia, Phoenix AZ
Published
In Arcadia, a pool deck coating has to deal with two things most suburbs do not: big, irrigated lots that keep the ground around the slab wet, and decks that mix original mid-century concrete with newer additions. Orange Coatings handles both with careful moisture checks, crack and joint repair, and slip-resistant Sherwin-Williams pool deck systems.
The neighborhood sits at the south foot of Camelback Mountain, roughly between 44th and 68th Streets and from Camelback Road north to the Arizona Canal. It spans parts of Phoenix and Scottsdale and is known for large lots, old citrus trees and ranch homes, many of which have been remodeled or rebuilt with much larger pools.

| Where | South of Camelback Mountain, about 44th to 68th Streets |
|---|---|
| Boundaries | Camelback Road north to the Arizona Canal |
| Cities | Parts of Phoenix and Scottsdale |
| Common deck types | Original cool-deck finishes and newer luxury pool decks |
| Coating system | Slip-resistant Sherwin-Williams, in light, cooler colors |
| Contractor details | ROC 365464, licensed, bonded and insured, based in Surprise |
Irrigation and a damp slab
Some Arcadia lots still take flood irrigation, and almost all of them water lawns and citrus heavily. That water soaks the soil right up to the edges of the pool deck. A slab sitting on wet ground can push moisture up into its surface, and a coating applied over moisture is one of the most common reasons decks blister and peel.
We plan around it. If your lot is flood irrigated, we schedule the coating well clear of an irrigation day, check the slab for moisture before starting, and look for white efflorescence, which shows where water is coming through. Edges next to lawn or planting beds get the closest look.

Mid-century pools with original cool-deck
Many of the original ranch homes have pools from the 1950s and 1960s. Their decks often have a troweled cool-deck texture, sometimes called Kool Deck, under several coats of paint, plus cracks from decades of slab movement and tree roots.
If the old texture is still bonded, it is a good base and can be recoated. Hollow or lifting areas come off, cracks are opened and filled, and chips and spalls along the coping are rebuilt before the surface is profiled and coated.
Old concrete next to new concrete
A remodel often leaves a deck that is part original slab and part new pour: a larger pool, an added spa, a new patio or an outdoor kitchen. The two pours look different, absorb differently and move separately.
A coating ties them together visually, but the joint between them has to be treated as a joint, not painted over and forgotten. New sections also need to be fully cured and dry, with their weak surface layer removed by profiling, before coating. We check the age of each section at the estimate.
Large luxury pools and rebuilt lots
- Bigger decks with several levels, steps and a raised spa
- Sun shelves and pool entries that need the most grip
- Fire features, outdoor kitchens and lighting to mask around
- Glass, stone and tile details that must stay clean
- Long runs that are coated in sections so nobody crosses wet coating
Citrus, leaves and stains
Old citrus trees are part of what makes the neighborhood. They also drop fruit, blossoms and leaves onto the deck, and crushed fruit and leaf tannins stain bare concrete. We pressure wash and degrease thoroughly and spend extra time on stained areas, so the coating goes onto a clean surface.
Once coated, the deck sheds those stains much more easily. A sweep and a rinse are usually enough.
How we run an Arcadia deck job
- In-person estimate: we look at every section, the irrigation, the cracks and what needs masking, and leave a written quote.
- We choose a start date that avoids irrigation days and, in summer, monsoon storms.
- Wash, degrease and treat stains; check moisture before going further.
- Repair cracks, patch spalls and low spots, and remove failing coating.
- Profile the surface, mask every edge and fixture, and apply the slip-resistant system.
- Final walkthrough with Noah Baldwin and a return-to-use time for the deck.
Colors under Camelback Mountain
Pull the deck color from the house, not the pool tile. Light sands, warm grays and soft off-whites suit both the original ranch homes and the newer builds, and they stay much cooler underfoot than darker colors. With the mountain behind most backyards, a warm, earthy light tone tends to look natural.
Light colors also hide dust and hard-water marks between cleanings, which is helpful on a large deck.
Other work for Arcadia homes
Remodels and older homes here often need exterior paint, custom finish work or a driveway refresh as well. We can look at the whole property in one visit.
Photos


Frequently asked questions
- Our Arcadia lot is flood irrigated. Can the pool deck still be coated?
- Yes, with planning. We schedule the work away from irrigation days, check the slab for moisture before coating and pay close attention to edges next to the lawn. Coating a damp slab is what causes blistering, so we wait rather than rush.
- Part of our deck is original and part was added in a remodel. Will the coating look uniform?
- The coating gives both sections the same color and texture. The joint between the old and new concrete is treated separately, because the two pours move independently.
- Can you recoat a 1950s or 1960s cool-deck surface?
- If most of it is still bonded to the slab, yes. We sound it at the estimate, remove what is loose and repair the cracks before coating.
- Do you work on both the Phoenix and Scottsdale sides of Arcadia?
- Yes. Arcadia and Scottsdale are both listed service areas for us, and the estimate is in person wherever you are in the neighborhood. Call (602) 932-3417.
- How many days is the backyard closed while you work?
- Most residential decks take two to four days, and large decks with many zones may take longer. Walking on it is usually fine about a day after the final coat, and we confirm the exact time.
- Will the coating handle citrus drop and leaf stains?
- A coated surface resists staining far better than bare concrete, and most drop sweeps or rinses off. Clearing fallen fruit before it is crushed in keeps the deck looking its best.