Orange Coatings LLC · (602) 932-3417 · Get an estimate

Paint color · Sherwin-Williams

Svelte Sage (SW 6164): Warm Khaki Sage Inside and Out

Published

Svelte Sage (SW 6164) is a muted, warm sage: a soft green built on a khaki base, so it reads earthy rather than minty. Its LRV comes out at about 41 when calculated from the RGB values, a true mid-tone with enough depth to show its green.

Outside it can look almost like a warm khaki in full sun and turn clearly sage in shade. Inside it suits cabinets, bedrooms and baths where a natural, calm color is wanted. Here is how to predict which side of it you will see.

Color swatch: Svelte Sage SW 6164, #B2AC96

Quick facts
ColorSvelte Sage
CodeSW 6164
Hex#B2AC96
RGB178, 172, 150
LRVAbout 41 (calculated from the RGB values, not Sherwin-Williams' published figure)
FamilyMuted warm sage, green over a khaki base

Svelte Sage's undertone

The RGB values (178, 172, 150) are close in red and green with blue lower, which gives a yellow-green khaki. The green is gentle, and the warmth keeps it from feeling cold or gray.

Compared with Clary Sage (SW 6178), which carries more green, Svelte Sage looks warmer and more beige. People who want a hint of green without committing to a true green often land here.

On stucco under strong sun

Bright desert sun washes out the green, and from the street a Svelte Sage house in midday light can read as a warm khaki-beige. In the morning and evening, and on shaded walls, the sage character comes back.

It looks at home beside olive trees, desert sage, mesquite and decomposed granite. That makes it a good choice for a house you want to tie to a naturalistic landscape rather than set apart from it.

Svelte Sage inside, from north rooms to sunny ones

In north-facing rooms the cooler light strengthens the green and grays it slightly, giving a calm, muted sage. In sunny south and west rooms the khaki warmth leads and it can look closer to a greige.

It is a natural fit for bedrooms, studies and bathrooms, and it suits kitchens with butcher-block or warm wood counters. With brass or bronze hardware it looks rich; with chrome it looks cleaner and more modern.

Svelte Sage on cabinets and vanities

Muted greens have become a popular alternative to white or gray cabinets, and Svelte Sage is gentle enough that it does not dominate a kitchen. It works well on lower cabinets or an island with lighter uppers, or on a bathroom vanity against light tile.

Cabinets need careful cleaning, sanding and priming before paint, and a harder, more washable sheen than walls. Satin or semi-gloss is typical; test the color next to the countertop and floor, which strongly affect how green it looks.

Bathroom vanity and mirror during interior painting prep
Bathroom vanity and mirror during interior painting prep

Good uses for Svelte Sage

Because both colors are warm, Svelte Sage on shutters, a front door or a garage door looks natural against a tan or beige body instead of high-contrast. It is a gentle way to bring a little green to the front of the house.

Keep the trim warm as well; a stark white between the tan and the sage can make the scheme look busy.

  • Exterior body on homes with natural desert landscaping
  • Shutters, a front door or a garage door on a tan or beige house
  • Kitchen islands, base cabinets and powder-room vanities in a warm, earthy green
  • Bedrooms, studies and laundry rooms

Colors to pair with Svelte Sage

  • Creamy (SW 7012), a coordinating color, for trim that keeps the sage warm
  • Alabaster (SW 7008) for a soft white on cabinets and interior trim
  • Canvas Tan (SW 7531) or Universal Khaki (SW 6150) as a tan body with Svelte Sage accents
  • Urbane Bronze (SW 7048) for a deep door, hardware or light fixtures

Heat and fading at an LRV of about 41

Its calculated LRV of about 41 comes from the RGB values; Sherwin-Williams publishes its own figure on the color page. As a mid-tone, it absorbs more of the sun's energy than a light beige, so a south or west wall will run warmer.

Muted greens tend to fade toward a lighter, grayer version of themselves. Because Svelte Sage is already soft, that drift is less obvious than on a strong green, but the sunniest walls will show it before the shaded ones.

Sheen and paint

Exterior stucco gets Sherwin-Williams Emerald Exterior from us, with Loxon masonry primer on any bare or patched stucco and two coats, sprayed and back-rolled. A flat or low sheen on the body, and satin or semi-gloss on doors, shutters and trim.

Indoors we use low-VOC Emerald Interior, with eggshell on bedroom and living walls and satin in baths and kitchens.

How to test Svelte Sage

  1. Paint two large boards so you can compare sun and shade at the same time.
  2. Indoors, test it in the coolest room you plan to paint, since that is where it looks greenest.
  3. Hold it next to cabinets, counters or roof tile that will stay.
  4. If you are in an HOA, check that a green-leaning body or accent is approved before painting.

Frequently asked questions

Is Svelte Sage green or beige?
It is a sage green on a khaki base. In bright sun and warm rooms it can look like a warm khaki-beige; in shade and north light the green is clearer.
Is Svelte Sage good for kitchen cabinets?
Yes, it is soft enough to use on a whole kitchen or just an island. Use a satin or semi-gloss sheen and proper cabinet prep.
What is the difference between Svelte Sage and Clary Sage?
Clary Sage (SW 6178) is a little greener and slightly cooler. Svelte Sage is warmer and closer to khaki.
Does Svelte Sage work on a stucco exterior?
It does, especially with natural desert landscaping. In midday sun it will look more khaki than green, and sunny walls will run warmer than a light color.
What trim goes with Svelte Sage?
Creamy (SW 7012), a Sherwin-Williams coordinating color, keeps it warm. Alabaster (SW 7008) is another soft white that works on cabinets and interior trim.
Is Svelte Sage a good bedroom color?
It is a calm, natural color for bedrooms. In a north-facing bedroom it reads as a muted gray-green, which many people find restful.

Related

Sources