Orange Coatings LLC · (602) 932-3417 · Get an estimate

How we work · Products

The Paints and Products We Use

Published · Updated

Orange Coatings uses top-tier Sherwin-Williams products. Exteriors get Emerald Exterior over Loxon masonry primer on bare or patched stucco, interiors get Emerald Interior, and garage floors get a Sherwin-Williams epoxy floor system.

Every estimate names the exact product line and the number of coats, so you can compare quotes on what actually goes on your walls instead of on a brand name alone.

Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job
Quick facts
Exterior finishSherwin-Williams Emerald Exterior, two full coats
Primer on bare or patched stuccoSherwin-Williams Loxon masonry primer
Interior finishSherwin-Williams Emerald Interior, low-VOC for occupied homes
Garage floorsSherwin-Williams epoxy floor systems, optional flakes and clear topcoat
Pool decksSlip-resistant Sherwin-Williams deck systems
On every estimateProduct line, number of coats and application method

Why the product line matters more than the brand

Every major paint maker sells a premium line, a mid-grade line and a contractor-grade line. Two quotes that both say "Sherwin-Williams" can mean very different paint, with different amounts of resin and pigment and very different life on a sunny Arizona wall.

That's why our estimates name the line, not just the brand. If another quote doesn't, ask the painter which product goes on each surface and how many coats it includes.

Exterior paint for stucco and siding

Emerald Exterior is our standard finish coat on stucco, siding, trim and fascia. On stucco we spray it for even coverage and back-roll right behind the sprayer so the paint gets pushed into the texture instead of bridging over the low spots.

Duration and SuperPaint are other Sherwin-Williams exterior lines. When you're weighing budget against how long the paint will last on a west-facing wall, we'll explain where each one fits.

  • Emerald Exterior: the top exterior tier, applied in two full coats
  • Duration: a premium line we compare with Emerald for your walls
  • SuperPaint: a solid mid-grade line for some projects
Lap siding painted light gray with darker gray trim around white-framed windows
Lap siding painted light gray with darker gray trim around white-framed windows

Primer: the step that keeps stucco paint from failing

Fresh stucco, new patches and bare concrete are highly alkaline. A finish coat painted straight onto them can break down early, so bare or patched areas get Sherwin-Williams Loxon masonry primer first.

Primer also evens out how the wall absorbs paint. A patch that soaks up more paint than the wall around it can show through the finish as a dull spot.

Interior paint for occupied homes

Inside, we use Sherwin-Williams Emerald Interior on walls, ceilings and trim. Most of the homes we paint are lived in while we work, so we use low-VOC coatings and mask floors, furniture and fixtures before any paint is opened.

Sheen is chosen room by room: flatter finishes hide wall flaws on large walls and ceilings, while kitchens, bathrooms, doors and trim get a finish that stands up to scrubbing.

Empty bedroom with a ceiling fan and floors covered in plastic before interior painting
Empty bedroom with a ceiling fan and floors covered in plastic before interior painting

Floors, pool decks and driveways

Garage and shop floors get a Sherwin-Williams epoxy floor system in the color you choose. Decorative flakes can be broadcast into the base coat, a clear topcoat goes over them to take the wear, and an anti-slip additive can be added for entries and wet areas.

Pool decks get slip-resistant Sherwin-Williams systems. Lighter colors stay noticeably cooler underfoot in an Arizona summer.

Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Picking colors from any brand

You don't have to choose from a Sherwin-Williams fan deck. Bring us a color name from another brand or your HOA's approved scheme, and your estimate will list exactly what goes on the body, trim and accents.

Before a full repaint we recommend large sample boards viewed on a sunny wall and a shaded wall, because strong Arizona light changes how a color reads.

Questions to ask any painter about products

  1. Which exact product line goes on each surface?
  2. How many coats, and is that written on the estimate?
  3. What primer goes on bare or patched stucco?
  4. Will you spray, roll, or spray and back-roll?
  5. What sheen goes on walls, ceilings, trim and doors?

Frequently asked questions

Why does the product line matter more than the brand?
Every brand sells good and cheap lines. Two quotes that both say Sherwin-Williams can mean very different paint, so ask each contractor for the exact product line and number of coats.
Do you use low-VOC paint inside?
Yes. For occupied homes we use low-VOC interior coatings and careful masking, since you're living there while we work.
Can I pick a color from another brand?
Yes. Bring us the color name or your HOA's approved scheme, and your estimate will list exactly what goes on each surface.
Why do you prime bare stucco instead of just painting it?
Bare stucco and new patches are alkaline enough to break down a finish coat. Loxon masonry primer is made for that, and it also evens out how the wall absorbs paint.
How many coats do you put on an exterior?
Two full coats of Emerald Exterior on the body, sprayed and back-rolled on stucco. The number of coats is written on your estimate.

Related