Custom home painting · Avondale
Custom Home Painting in Avondale, AZ
Published
Custom home painting in Avondale is mostly about finish work inside homes people already own: deep accent walls, high-gloss doors and trim, additions and garage conversions blended into the house, and full repaints with a real color plan. Orange Coatings does that work with Sherwin-Williams Emerald Interior and Emerald Exterior, starting with a same-day, in-person estimate.
The city sits right next to Phoenix and mixes older neighborhoods around its original downtown with newer subdivisions. In both, the custom part is the level of detail, and this page explains what that detail involves.

| Population | 89,334 (2020 census), up from 76,238 in 2010 |
|---|---|
| ZIP codes | 85323, 85392 |
| Area | 47.87 sq mi |
| Elevation | 974 ft |
| Coatings | Emerald Interior and Exterior; Loxon primer on bare stucco |
| License number | ROC 365464 (licensed, bonded, insured) |
The specialty finishes behind a custom look
None of these is exotic on its own. What makes a house look custom is doing all of them with the same care, so the cut lines are straight, the sheens are consistent and nothing looks rushed.
- High-gloss or semi-gloss enamel on doors, trim and built-ins
- Flat ceilings with a hand-cut line where ceiling meets wall
- Eggshell or satin walls chosen room by room
- Accent walls built up in multiple coats until the color is solid
- Niches, arches and recessed panels in contrast colors
- A primer suited to fresh drywall, for a smooth base under the finish
Deep accent colors take more than two coats
Rich reds, navy, forest green and charcoal are mixed in a deep tint base that carries more colorant and less hiding pigment than a pastel. Over a light wall, two coats can look streaky or show roller marks. We start deep colors over a primer tinted toward the finish color, then add coats until the wall reads as one solid color under every light in the room.
Deep colors also show touch-ups more than light ones, so we roll them corner to corner in one session and keep some of the same batch for later repairs. A matte or eggshell sheen hides more than satin on a large dark wall.

Why high-gloss doors and trim depend on prep
Gloss works like a mirror for whatever is under it. Every dent, nail hole, open joint and brush mark shows. Before enamel goes on, trim gets filled, sanded smooth, caulked at every joint and wiped free of dust; doors come off their hinges or get masked at the hardware, and edges get as much attention as faces.
Enamel then needs time between coats and a gentle first few weeks while it cures. Follow the product label for dry and recoat times, and expect doors to feel slightly tacky against weatherstripping for a few days.
Additions, garage conversions and enclosed patios
Turning a garage into a bedroom or enclosing a patio adds fresh drywall and stucco that must blend with the rest of the house. The new drywall should get the same texture as the existing walls before paint, then a primer so it does not soak up the finish coat unevenly. Outside, the new stucco is primed with Loxon masonry primer and the whole elevation is repainted, because old paint will not match fresh paint even in the same color.
We coordinate with your contractor so painting happens after the inspections and finish carpentry, not around them.
Older houses around the original downtown
Around the city's original downtown there are older homes with painted block, wood windows and trim that has been coated many times. Those surfaces need more scraping, sanding and spot priming than a newer house. Glossy oil-based trim needs a bonding primer before latex enamel, or the new coat will peel off in sheets.
For homes built before 1978, ask about lead testing before old paint is sanded; any painter disturbing lead paint has to follow lead-safe practices.
Exteriors that fit the custom interior
A custom interior deserves an exterior to match. On stucco we wash, repair cracks, prime and apply two coats of Emerald Exterior, sprayed and back-rolled. Because Avondale sits under 1,000 feet and summer afternoons are among the hottest in the valley, exterior work is scheduled for early starts and kept inside the temperature limits on the label. Front doors and garage doors are an easy place to carry an interior accent color outside.

A tidy job while you live there
Custom interior work in an occupied home is mostly about protection and order. Floors are covered, furniture is moved and wrapped, hallways stay passable, and each room is cleaned before the crew moves on. Our interior coatings are low-VOC, and we give daily updates on progress so you always know which rooms are next.
Before we start, it helps to clear small items, art and valuables from the rooms on the schedule and to tell us about any room that has to stay usable, such as a home office or a nursery. We plan the order of rooms around that and write it into the estimate.
Photos



Frequently asked questions
- How many coats does a dark accent wall in Avondale need?
- Often three or more over a tinted primer, depending on the color and what is under it. We keep going until the wall reads solid under every light in the room, and the estimate says what we expect.
- Should interior doors be high-gloss or semi-gloss?
- High-gloss looks sharp and wipes clean but shows every flaw, so it needs very smooth prep. Semi-gloss is more forgiving and still durable. We can show both on a sample door.
- Can you blend a garage conversion into the rest of the house?
- Yes. Once the texture matches, we prime the new drywall and stucco and repaint full rooms and elevations so the conversion does not stand out.
- Will latex paint stick to my old oil-based trim?
- Not directly. Glossy oil enamel has to be sanded and primed with a bonding primer first, otherwise the new coat can peel.
- Do you paint the outside as well as the custom interior?
- Yes. Exteriors get our standard stucco process with Loxon primer where bare or patched and two coats of Emerald Exterior.
- What does a custom interior repaint in Avondale usually include?
- Walls, ceilings, trim and doors, each in the sheen that suits the room, plus any accent walls, niches or built-ins you want picked out. Patching, sanding, caulking and priming come first, and the estimate lists every color and product by surface.