Orange Coatings LLC · (602) 932-3417 · Get an estimate

Epoxy flooring · Scottsdale

Luxury Epoxy Garage Floors in Scottsdale, AZ

Published

Orange Coatings installs epoxy garage floors in Scottsdale custom homes, including three-, four- and five-bay garages and collector car spaces. Each slab is ground, repaired and cleaned before a Sherwin-Williams epoxy floor system goes down, with decorative flakes, a clear topcoat and an anti-slip additive as options.

On a large, high-end garage the goal is a floor that looks like part of the house: an even finish from one wall to the other, clean lines at cabinets and doors, and no visible seams between batches.

Aerial view of downtown Scottsdale, Arizona
Aerial view of downtown Scottsdale, Arizona Photo: Quintin Soloviev, CC BY 4.0, via Wikimedia Commons (resized)
Quick facts
Scottsdale ZIP codes85250-85264, 85266-85269, 85271
Population241,361 (2020 census)
Elevation2,165 feet
Floor systemSherwin-Williams epoxy, decorative flakes, clear topcoat, optional anti-slip
Custom home experienceCustom builds and luxury repaints in Surprise and Scottsdale
CredentialsLicensed under AZ ROC 365464, bonded and insured

Garages that are part of the house

Scottsdale has grown into a city of more than 241,000 people, and many of its custom homes, especially in the north, are built around large garages. They hold daily drivers, weekend cars and sometimes a small collection, and owners often open the garage to guests the same way they would a wine room.

That raises the bar for the floor. A thin, uneven coating or a patchy flake broadcast stands out under bright LED lighting and polished paint. The work that makes the difference is mostly invisible: grinding, filling, careful mixing and patient cut-ins.

The city's official slogan is The West's Most Western Town, but its newer garages often look more like a gallery than a barn.

A showroom floor starts with the slab

Every flaw in the concrete shows through a glossy topcoat. We grind the whole slab, fill pinholes, spalls and cracks, and grind the repairs flush so the finished floor reads as one plane.

Saw-cut control joints need a decision. Filling them gives a cleaner look; leaving them open lets the slab move along its joints without cracking the coating somewhere else. We walk through the trade-off for your slab before work starts.

Pinholes are tiny air pockets in the concrete surface. Left open, they can push air up through a fresh coat and leave small craters, so filling them is part of prep for a high-gloss finish.

An even finish across five bays

  • Base coat mixed in matched batches so the color does not shift bay to bay
  • Flakes broadcast at a consistent density across the whole floor
  • Wet edges kept moving so there are no lap marks between sections
  • Loose flakes scraped and vacuumed before the topcoat
  • Clear topcoat over everything for depth and wear resistance
  • Anti-slip limited to entries and wash areas so the parking bays stay glossy
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Cabinets, lifts and car-care stations

Many high-end garages have built-in cabinetry, a car lift or a detailing station with a sink. The ideal is to coat before cabinets and lifts go in, so the floor runs underneath and nothing has to be cut around. On an existing garage we cut in tight to cabinet toe kicks, door thresholds and stem walls by hand.

Detailing areas get wet, and a wet glossy floor is slick. A band of anti-slip additive around the wash station keeps it safe without changing the look of the rest of the floor. Lift posts and their anchors are worth discussing with the lift installer before coating.

Climate-controlled garages

A lot of luxury garages here are insulated, and some are air conditioned. That is good news for epoxy. A conditioned garage keeps the slab in the product's temperature range for longer, which gives more working time for an even roll and broadcast.

Even so, we confirm slab temperature and humidity against the Sherwin-Williams label before each coat. Scottsdale sits at about 2,165 feet, a bit higher than the West Valley, but summer garages still get hot when the cooling is off.

If the garage has a mini-split or ducted cooling, leave it running on application days unless we ask otherwise.

Choosing a flake blend for a collector garage

Gray and black blends make bright paint stand out, and they hide tire dressing and light dust. Warmer tan and stone blends tie the garage to desert-toned stucco and stone exteriors. Some owners want very light floors for a gallery feel; those look striking but show tire marks sooner.

We bring flake samples to the estimate and look at them in your garage lighting. It is the most reliable way to choose.

Driveway finished with a decorative flake coating in front of a garage
Driveway finished with a decorative flake coating in front of a garage

Protecting the finish once the cars are back

  • Park long-term cars on tire pads to avoid tire staining
  • Apply tire dressing outside, since silicone overspray makes the topcoat slick
  • Dust-mop often and wash with a pH-neutral cleaner, not acid or harsh degreasers
  • Fit tool chests and detailing carts with soft casters
  • Put felt pads under bar stools and furniture if the garage doubles as a lounge

How a large-garage job runs

  1. Call (602) 932-3417 for a same-day, in-person estimate with Noah or an estimator.
  2. Confirm colors, joint treatment, anti-slip zones and any built-ins on the written quote.
  3. Vehicles and storage come out, and we protect cabinets, walls and doors.
  4. Grind, repair and clean the full slab.
  5. Apply base coat, flakes and clear topcoat in planned sections with wet edges.
  6. Walk the cured floor with you before cars go back in.

Photos

Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Driveway finished with a decorative flake coating in front of a garage
Driveway finished with a decorative flake coating in front of a garage

Frequently asked questions

Do you install epoxy in Scottsdale even though you are based in Surprise?
Yes. Scottsdale is one of our service areas and one of the places we offer custom home painting. Estimates there are the same in-person, same-day visit.
Should the garage be coated before or after cabinets go in?
Before, if you can. The floor then runs under the cabinets with no cut lines. On a finished garage we cut in by hand around them.
Will the color be consistent across a four- or five-car garage?
That is what matched batches, consistent flake density and planned wet edges are for. We plan the sequence before mixing the first batch.
Should control joints be filled?
It depends on the slab. Filled joints look cleaner, while open joints let the slab move where it was designed to. We go over both with you.
Can you add grip near my detailing sink without dulling the whole floor?
Yes. The anti-slip additive can go only in the wash area and at entries, leaving the parking bays smooth and glossy.
Can a car lift sit on an epoxy floor?
Usually, but lift anchoring comes first. Talk to the lift maker or installer, and we will plan the coating around the post locations.
Is epoxy a good fit for a garage that doubles as an entertaining space?
Yes. A flake floor with a clear topcoat cleans up like a kitchen floor after a gathering. Felt pads under stools and furniture keep their legs from scratching it.

Related

Sources