Epoxy flooring · Surprise
Epoxy Garage Floors in Surprise, AZ
Published
Orange Coatings installs epoxy garage floors in Surprise using Sherwin-Williams epoxy floor systems over concrete that has been cleaned, degreased, repaired and mechanically profiled. You can add decorative flakes, a clear topcoat and an anti-slip additive, and the estimate is done in person on the same day you call.
Our shop is at 18428 West Bridger Street in the 85388 ZIP, so this is our home market. Most of the garage slabs we see here are fairly young, and that changes how the prep has to be done.

| Our address | 18428 West Bridger Street, ZIP 85388 |
|---|---|
| ZIP codes we cover here | 85374, 85378-85379, 85387-85388 |
| City population | 143,148 residents (2020 census) |
| Floor system | Sherwin-Williams epoxy with optional flakes, clear topcoat and anti-slip additive |
| License | ROC 365464, licensed, bonded and insured in Arizona |
| Estimates | Same-day and in person |
Why a young builder slab still needs grinding
Surprise had 30,848 residents in 2000 and 143,148 by 2020. That growth means most garages in town sit on slabs poured by production builders in the last twenty-five years. Those floors are usually power-troweled very smooth, and many got a curing compound or a light sealer when the house was built.
Smooth, sealed concrete looks clean, but epoxy has nothing to grab on it. A coating rolled onto a slick builder slab often looks fine for a season and then lets go where the tires sit. We grind the floor to open the surface, vacuum the dust, and only then start the base coat. That one step is the difference between a floor that bonds and one that peels.
What goes into an Orange Coatings garage floor
- Everything moved out, then the slab swept, washed and degreased
- Oil and tire stains treated so they do not bleed through
- Cracks, divots and spalled spots filled and leveled
- Mechanical profiling so the epoxy bonds into the concrete
- A Sherwin-Williams epoxy base coat in the color you pick
- Decorative flakes broadcast into the wet base coat, if you want them
- A clear topcoat to take the wear from tires, boots and dropped tools
- Anti-slip additive in the topcoat near the house door or a wash area, if you ask for it

Summer heat in a west-facing garage
Plenty of Surprise homes have the garage door facing west. By late afternoon in July, that garage can be hotter inside than the shade outside, and the slab holds the heat into the evening. Heat speeds up how fast epoxy sets in the bucket and on the floor, which leaves less time to spread it evenly and broadcast flakes.
So in summer we start early, while the concrete is at its coolest, and keep the work inside the temperature and humidity limits on the product label. During monsoon season, June 15 to September 30, humid evenings get checked too, because moisture in the air near the dew point can cloud a fresh coat.
Picking a flake blend that hides desert dust
Dust blows into every garage here, and a solid single-color floor shows it within a day. A flake blend breaks up the surface so fine dust, tire marks and small drips are much harder to spot. Mid-tone blends with tan, gray and a little black tend to hide the most.
Many people match the flakes to the stucco and trim of the house so the garage feels like part of the home when the door is open. Bring a paint chip or tell us your exterior colors at the estimate and we can talk through blends side by side.
How an install runs, start to finish
- You call or request a quote, and we set a same-day visit.
- Noah or an estimator measures the garage, looks at cracks, stains and old coatings, and leaves a written quote.
- We schedule the job and you choose the base color and any flake blend.
- You empty the garage, or tell us ahead of time what has to stay.
- The crew cleans, degreases, repairs and profiles the slab, then applies the coats.
- The floor cures. Foot traffic usually comes back in about a day and cars in about three, depending on the system and the temperature.
- We walk the floor with you, handle any touch-ups and clean up.
What moves the price of a garage floor
Each of these shows up as its own line on the written quote, so you can see what drives the number and leave off options you do not need.
- Square footage and the number of bays
- How much crack, divot and spall repair the slab needs
- Removing an old coating or floor paint
- A moisture-mitigating primer, if testing calls for one
- Flakes, the clear topcoat and the anti-slip additive
- Extra areas like a cart bay, a side storage room or the driveway
Garages in Sun City Grand and other 55+ neighborhoods
Surprise is also home to Sun City Grand and other age-restricted communities. Garages there often hold a golf cart, a second fridge and a workbench as well as the car. For those floors we often suggest the anti-slip additive along the walking path to the house door, since a glossy topcoat can feel slick under wet shoes.
Cart tires are small and carry a lot of weight on a narrow footprint, and they turn in place more than a car does. A good bond and a full clear topcoat hold up to that far better than a thin coat of garage floor paint.
Pairing the garage with the driveway
A finished garage floor next to a stained, faded driveway can look odd. We also coat concrete driveways, and doing both in one visit lets you plan the colors together and keep the cars out once instead of twice.

Photos



Frequently asked questions
- My Surprise home is only a few years old. Does the slab really need prep?
- Yes. Newer builder slabs are often smooth and sometimes sealed, and epoxy will not bond well to that. Grinding opens the surface so the coating can lock in.
- Is it too hot to install epoxy in a Surprise garage in July?
- It can be done, but the timing matters. We work in the cooler morning hours and stay inside the product's temperature limits, and if a day is out of range we move the work rather than rush it.
- Can you coat over the gray garage floor paint the last owner used?
- Not as is. Old floor paint is usually the weakest layer, so loose or peeling paint has to come off before new epoxy goes down. We look at it during the estimate and tell you what removal is needed.
- Which flake colors hide dust best?
- Busy mid-tone blends with tan, gray and some black hide dust and tire marks better than solid colors or very light blends. We can show options when we visit.
- Do I need to empty the whole garage?
- The floor has to be clear to be prepped and coated, including the edges. Heavy cabinets or a fridge are worth discussing at the estimate so we can plan around them.
- Where are you located?
- Our shop is at 18428 West Bridger Street in Surprise. Call (602) 932-3417 and we can usually come out for an estimate the same day.
- Can the anti-slip go in only part of the garage?
- Yes. It is mixed into the topcoat where you want it, so it can run along the path to the house door while the parking bays stay smooth.