Industrial painting · Scottsdale
Industrial and Flex Space Painting in Scottsdale, AZ
Published
Orange Coatings paints flex buildings, hangars, business-park warehouses and utility structures in Scottsdale, where industrial space usually has to look as good as it works. We coat exposed steel, block, tilt-up and concrete with commercial-grade Sherwin-Williams systems and hold them to the appearance standard a showroom or office front demands.
We are based in Surprise, on the other side of the Valley, and still start every Scottsdale job with a same-day, in-person estimate.

| Population | 241,361 (2020), up from 217,385 in 2010 |
|---|---|
| City area | 184.44 square miles |
| Elevation | 2,165 feet |
| Area code | 480 |
| Work we do here | Flex units, hangars, open ceilings, utility buildings, floors |
| License | Arizona ROC 365464, bonded and insured |
Industrial space in a city known for resorts
Scottsdale is better known for resorts, golf and Old Town than for factories, and it has little heavy industry. Its working buildings are concentrated in business districts, especially the area around Scottsdale Airport, where flex units, light manufacturing, hangars and service businesses share the same streets. City yards and utility buildings fill out the rest.
Those buildings face a higher bar than most. A flex unit might hold a design showroom up front and a fabrication shop in back, and both halves are seen by clients.
Because so much of this work is seen by customers, the final walkthrough carries extra weight. Touch-ups are handled on the spot, in the same product and sheen as the main coats.
Flex units with a showroom up front
The front of a flex unit is treated like a commercial interior: smooth walls, crisp cut lines and Sherwin-Williams Emerald Interior in the sheen the design calls for. The back is treated like a shop, with coatings picked for exposed steel, block and concrete. The hard part is the transition, where the two spaces meet at a door or an open wall, and where clients will notice a sloppy line.
We schedule the showroom side for hours that keep it open to customers, and the shop side around production.

Painting open ceilings and exposed structure
Open ceilings with painted deck, joists, ducts and conduit are a common design choice in Scottsdale offices, studios and flex space. Done well, they look uniform from the floor. Done poorly, they show stripes, missed joist sides and paint on the sprinkler heads.
- Clean dust and grease from the deck, joists and ductwork.
- Bag or cover every sprinkler head; painted sprinkler heads can stop working and must be replaced.
- Protect lights, sensors and anything that must not be coated.
- Spray from lifts in a consistent pattern so every face of every joist gets the same film.
- Use a dry-fall coating where overspray could land on finished floors or equipment.
- Inspect from the floor in working light before lifts leave.
Hangars and aviation-related buildings
Work near an airfield comes with access rules set by the airport and the building owner. We follow those rules, and we plan lifts and deliveries so aircraft movement is never blocked.
Hangar floors also take dropped tools, jacks and tow equipment, which chip thin coatings. Proper profiling and a full-thickness floor system matter more here than in a typical garage.
- Large hangar doors, frames and tracks
- Exposed steel trusses and columns
- Shop and parts-room walls with fuel and hydraulic fluid splash
- Hangar floors that need to shed oil and be easy to sweep
- Exterior steel exposed to full sun on an open airfield
Matching brand and design standards
Corporate tenants often arrive with a brand book naming exact colors and sheens. We work from those color numbers, check a sample in the actual space before full production, and keep the same product and sheen throughout so the color reads the same wall to wall. If the brand color is a deep or bright shade that will fade quickly in full sun, we will say so and suggest where to use it.
A sample patch matters even more here, because a color picked under showroom lighting can look different on a sunlit exterior.
Coated floors for hangars, shops and showrooms
The concrete comes first: degreasing, crack repair and profiling so the Sherwin-Williams epoxy system has something to bite into. Shops and hangars usually get a solid color with anti-slip additive near doors. Showroom floors can take decorative flakes and a clear topcoat for a finished look that is still easy to clean.

Planning a job across the Valley
Scottsdale sits about 780 feet higher than our home base in Surprise, but summers here are still well over 100°F, and steel in the sun still passes coating temperature limits by late morning. Exterior work goes best from fall through spring. During monsoon season, June 15 to September 30, we plan weather days into the schedule.
Every project still follows our five steps: call, same-day estimate, scheduling and product selection, painting, then a final walkthrough and cleanup.
Photos



Frequently asked questions
- Do you paint flex and business-park buildings near Scottsdale Airport?
- Yes. Flex units, light-industrial buildings and hangars in that area are a good fit for our industrial coatings. Showroom and office fronts get interior finishes in the same project.
- Can you paint an open ceiling without coating the sprinkler heads?
- Yes. Every sprinkler head gets bagged or covered before spraying and uncovered afterward. Painted heads can fail and have to be replaced, so this step is not optional.
- Can you match our brand colors exactly?
- We work from your color numbers and check a sample in the space before full production. Keeping one product and sheen throughout is what keeps the color consistent.
- Do you really come to Scottsdale from Surprise?
- Yes. Scottsdale is one of our listed service areas, and estimates are same-day and in person, even on the east side of the Valley.
- What kind of floor coating works in a hangar?
- We recommend a Sherwin-Williams epoxy floor system, built to full thickness over concrete that has been degreased and profiled, so it resists chips from jacks and sweeps clean. Anti-slip additive near doors helps when floors get wet.
- Can our showroom stay open while the shop side is painted?
- Usually. We separate the two areas, schedule the showroom for after hours or quiet periods, and keep odors and overspray contained in the shop.
- Do city and utility buildings in Scottsdale need a different approach?
- Not different coatings so much as different paperwork. Public owners often name the coating system in their bid documents, so we work from that spec, supply product data sheets, and provide insurance certificates and closeout documents.