Orange Coatings LLC · (602) 932-3417 · Get an estimate

Industrial painting · Surprise

Industrial Painting in Surprise, AZ

Published

Orange Coatings paints industrial, utility and municipal buildings in Surprise from our own shop at 18428 West Bridger Street, inside the city. We coat structural steel, metal decking, concrete block, tilt-up panels and masonry with commercial-grade Sherwin-Williams systems, and every job starts with a same-day, in-person estimate.

Most of the industrial work here is not giant factories. It is pump stations, well sites, maintenance yards, HOA facility buildings, and the shops and warehouses along Grand Avenue and the Loop 303. Each of those has its own prep problems, and that is what this page walks through.

Surprise Lake in Surprise, Arizona
Surprise Lake in Surprise, Arizona Photo: Gage Skidmore, CC BY-SA 3.0, via Wikimedia Commons (resized)
Quick facts
Home base18428 West Bridger Street, Surprise, AZ 85388
City population143,148 at the 2020 census
ZIP codes we cover85374, 85378–85379, 85387–85388
SubstratesStructural steel, metal decking, block, tilt-up, masonry, concrete
LicenseAZ ROC 365464, bonded and insured
EstimatesSame-day and in person

What industrial painting looks like in a fast-growing city

Surprise went from 30,848 residents in 2000 to 143,148 in 2020. A city that grows that fast builds a lot of support infrastructure in a short window: water and wastewater sites, block equipment enclosures, maintenance shops and storage buildings. Many of those structures have now been through fifteen or twenty Arizona summers, and their original coatings show it.

The typical request we see is a mix of surfaces on one property rather than one giant wall. A single site can have galvanized fencing, painted steel doors, block walls, exposed piping and a concrete floor inside.

  • Well sites and booster pump stations with steel piping, valves and doors
  • Block enclosures around electrical and mechanical equipment
  • HOA and community maintenance yards and storage buildings
  • Metal and tilt-up buildings along Grand Avenue and the Loop 303
  • Shop and storage floors that need a coating, not just a sweep

Municipal and HOA facilities: paperwork before paint

Public and association work runs on documents. Noah Baldwin and our team have direct experience in municipal construction environments, and we can meet the documentation and compliance requirements a government facility project asks for. That usually means product data sheets for every coating, a written scope that matches the bid package, certificates of insurance sent before we mobilize, and closeout documentation at the end.

For an HOA, the same documents go into the board packet. A clear written scope keeps a board vote from stalling over questions like which doors are included or what primer goes on the gates.

How we prep rusted steel at pump stations and well sites

  1. Degrease every steel surface first. Oil and grease under a primer is a guaranteed failure, so this step is never skipped.
  2. Remove loose rust and failing paint with hand tools, power tools or abrasive cleaning, depending on what the spec calls for.
  3. Feather the edges of sound old paint so the new film does not show a ridge or lift at the line.
  4. Prime bare steel the same day it is cleaned, before flash rust can form.
  5. Brush a stripe coat onto welds, bolt heads and sharp edges, where coatings run thin and rust starts first.
  6. Apply the finish coats in the color standard the owner uses for piping and equipment.

Block walls and tilt-up panels

Concrete block soaks up water and pushes out salts. When sprinklers or landscape irrigation hit the base of an enclosure wall, you get white efflorescence and paint that bubbles and flakes along the bottom few courses. Painting over it without fixing the water source just repeats the failure.

Our prep on masonry is a wash, salt removal, a dry-out period and a masonry primer before the finish. Tilt-up panels get checked for leftover form-release agent and chalk, both of which keep new paint from bonding.

Scheduling around a Surprise summer

Air temperatures above 100°F are routine from late spring into fall, and dark steel in direct sun runs far hotter than the air around it. Every coating's data sheet lists a maximum surface temperature, and on many summer afternoons a south-facing steel door is past it.

So summer crews start at first light and follow the shade: west walls in the morning, east walls after midday. Monsoon season, June 15 to September 30, adds dust, wind and humidity. Coatings also need the surface to stay above the dew point while they cure, so summer schedules include weather days.

Keeping a working site safe

Most of the facilities we paint stay in use while we work. Before day one we agree on where lifts and ladders go, which walkways stay open, and which equipment your team will shut down or lock out when we work near it. Interior coatings get ventilation planned in, and we follow the safety requirements in the project spec.

What an industrial scope from Orange Coatings includes

  • Site assessment and substrate evaluation before pricing
  • Abrasive cleaning, degreasing and priming matched to each surface
  • A coating system chosen for the substrate and its exposure
  • Application to metal, concrete, masonry and structural steel
  • Work to your spec sheets and safety requirements
  • Final inspection and closeout documents
Orange Coatings painter cutting in around a commercial doorway under an exit sign
Orange Coatings painter cutting in around a commercial doorway under an exit sign

Floors in local shops and storage buildings

Bare concrete in a maintenance shop stains, dusts and holds oil. We install Sherwin-Williams epoxy floor systems over concrete that has been cleaned, degreased, crack-repaired and profiled, with an anti-slip additive where floors get wet. Older slabs get a moisture check first, because vapor coming up through the concrete is a leading cause of epoxy failure.

Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Photos

Orange Coatings painter cutting in around a commercial doorway under an exit sign
Orange Coatings painter cutting in around a commercial doorway under an exit sign
Paint tray and five-gallon bucket set on a drop cloth before a job
Paint tray and five-gallon bucket set on a drop cloth before a job
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Frequently asked questions

Can you paint a pump station or well site in Surprise while it stays in service?
Usually, yes. We plan the work around the equipment and coordinate with the operator, who decides what gets shut down and when. Anything we can't safely paint while it runs gets scheduled for a planned outage.
Do you take on city, county or other public facility work?
Yes. Our team has direct experience in municipal construction, we hold ROC License 365464 and carry full bonding and insurance. We can provide the submittals, insurance certificates and closeout documents a public project requires.
Is Orange Coatings actually located in Surprise?
Yes. Our address is 18428 West Bridger Street, Surprise, AZ 85388. Estimates are same-day and in person, so we walk the site with you rather than quoting from photos.
What months are best for an exterior industrial repaint here?
October through April is the easiest window, because steel and block stay inside the temperature limits on the coating labels for most of the day. Summer work is possible with early starts and shade-following, but monsoon storms can cost days.
Will the written estimate name the primers and coatings?
Yes. The estimate lists the primer and finish for each substrate, so steel, block and concrete each get the right system. That also gives your board or facilities manager something specific to approve.
Can you match our existing safety and piping colors?
Yes. Give us your color standard or a sample, and we match it in the finish coat. Safety colors on bollards, curbs and doors get the same treatment.

Related

Sources