Orange Coatings LLC · (602) 932-3417 · Get an estimate

Paint color · Dark warm brown-gray

Porpoise (SW 7047): Dark Warm Brown-Gray for Trim and Doors

Published

Porpoise (SW 7047) is a dark, warm brown-gray from Sherwin-Williams, softer than black and warmer than charcoal. Its LRV is about 13, calculated from the RGB values, so in Arizona it shines on fascia, window trim, doors, garage doors on shaded elevations and interior accents, and asks a lot as a full sun-facing body color.

It is often chosen as an alternative to black trim on warm greige or tan houses, where black can look harsh and charcoal can look cold.

Color swatch: Porpoise SW 7047, #6B645B

Quick facts
ColorPorpoise
CodeSW 7047
Hex#6B645B
RGB107, 100, 91
LRVAbout 13 (calculated from the RGB values)
Color familyDark warm gray-brown

What undertone does Porpoise have?

Porpoise has RGB values of 107, 100 and 91. Red leads, blue trails, and the spread is moderate, so it reads as a warm gray-brown, close to a dark taupe or the color of wet driftwood. Some light brings out a faint olive cast.

Next to Urbane Bronze (SW 7048), its darker neighbor by number, Porpoise looks lighter and more gray. Set beside charcoal, the brown in it becomes obvious. On a warm greige house, it reads as a natural, deeper version of the body color.

Porpoise in Arizona sun and in north-facing rooms

In full sun, Porpoise lightens to a medium brown-gray and the texture of stucco or wood grain shows. In shade it looks close to dark chocolate-gray. Fascia boards, which sit in their own shadow most of the day, look darker than the chip.

Inside with north light, Porpoise can look cooler and grayer, and in a small room it can feel very dark. With warm light it looks rich and cozy. It suits dens, libraries and bathrooms with warm wood vanities.

Lap siding painted light gray with darker gray trim around white-framed windows
Lap siding painted light gray with darker gray trim around white-framed windows

Where Porpoise works

  • Fascia, window trim and pop-outs on a greige, tan or cream body
  • Front doors and side gates
  • Garage doors on shaded elevations
  • Wrought iron, railings and light posts as a softer alternative to black
  • Interior islands, built-ins, accent walls and bathroom vanities

Pairings for Porpoise

Sherwin-Williams lists Shoji White (SW 7042) and Eider White (SW 7014) as coordinating colors for Porpoise, along with SW 9030. Shoji White is a creamy off-white; Eider White is a softer gray-leaning white, both in the low-to-mid 70s LRV.

  • Creamy body or trim: Shoji White (SW 7042)
  • Grayer light companion: Eider White (SW 7014)
  • Warm greige bodies to put Porpoise against: Amazing Gray (SW 7044), Analytical Gray (SW 7051) or Pussywillow (SW 7643)
  • Warm tan body: Stone Lion (SW 7507)

Porpoise versus black or bronze trim

Black trim gives the strongest contrast but can look severe on a warm stucco house in bright sun, and it shows dust and pollen quickly. Porpoise keeps a dark outline around windows and rooflines while staying in the same warm family as greige or tan walls.

If you want something deeper, Urbane Bronze (SW 7048) is darker, with an LRV of about 8. Porpoise is the choice when bronze looks too heavy against a light body or when you want a little less heat on the trim.

Porpoise inside: islands, vanities and dens

Indoors, Porpoise does its best work on furniture-like pieces: a kitchen island in a room of white or cream cabinets, a bathroom vanity, built-in shelving around a fireplace, or interior doors in a hallway with light walls. The warm brown base looks good with oak, walnut, brass and aged bronze, and it hides scuffs from shoes and chair legs far better than white.

On full walls, it suits rooms meant to feel enclosed, such as a den or a study used mostly at night. Keep ceilings and trim light, and make sure the room has warm lamps; under cool daylight bulbs Porpoise can look flat and gray.

LRV of about 13: heat and fading

Porpoise reflects only around 13 percent of visible light, so sunlit surfaces in this color get hot. That matters most on doors and garage doors facing south or west, which is why we suggest it for shaded elevations or small surfaces on sunny sides.

Warm brown-grays are usually built from earth pigments, which tend to hold their hue. As they age, sunny surfaces chalk and lighten slightly; a gentle cleaning before repainting shows how much depth is left.

Sheen and product for Porpoise

Porpoise trim and doors look best in satin or semi-gloss Sherwin-Williams Emerald Exterior, which sheds dust and cleans easily. Where Porpoise goes on stucco, bare or patched areas get Loxon masonry primer, then two coats sprayed and back-rolled.

As with other dark colors, a deep tint base and two full coats give even color, and touch-ups need the same sheen. Inside, satin suits cabinets and vanities; eggshell or matte suits walls.

Testing Porpoise

  1. Paint a sample board in two coats and hold it up at fascia or door height.
  2. Compare it beside your body color and window frames in sun and shade.
  3. Put it next to a black or bronze sample if you are deciding between them.
  4. Check your HOA's palette for approved trim and door colors.

Frequently asked questions

Is Porpoise brown or gray?
It is a warm brown-gray, sitting between the two. Next to charcoal it looks brown; next to bronze it looks grayer.
Is Porpoise a good trim color in Arizona?
Yes, especially on greige, tan or cream stucco, where black can look harsh. At an LRV of about 13 it gets hot, which is easier to manage on trim than on walls.
What colors go with Porpoise?
Sherwin-Williams lists Shoji White (SW 7042) and Eider White (SW 7014) as coordinating colors. Warm greiges like Amazing Gray (SW 7044) make good body colors with Porpoise trim.
How does Porpoise compare with Urbane Bronze?
Urbane Bronze (SW 7048) is darker, with an LRV of about 8. Porpoise is lighter and slightly grayer.
Can Porpoise be used on a front door?
Yes, it makes a warm, understated door color. A door in strong afternoon sun will get hot and need refreshing sooner than one under a porch.
Is Porpoise good for bathroom vanities?
Yes, it suits vanities with warm wood, brass or matte black fixtures. Use a satin or semi-gloss finish for moisture resistance.

Related

Sources