Orange Coatings LLC · (602) 932-3417 · Get an estimate

Pool deck coatings · Kool Deck

Kool Deck Repair and Resurfacing in the West Valley

Published

Most worn Kool Deck does not need to be torn out. If the concrete underneath is sound, we can repair the cracks and chips, clean and profile the surface, and recoat it with a slip-resistant Sherwin-Williams pool deck system in a light color that stays cooler underfoot.

Kool Deck is a brand of cement-based textured finish that has covered pool decks around Phoenix for decades. Its knockdown texture holds up well, but sun, pool chemicals and monsoon runoff eventually leave it faded, chalky, stained and cracked. Resurfacing restores the look and the grip without the cost and mess of new concrete.

Textured, slip-resistant pool deck coating beside a backyard pool
Textured, slip-resistant pool deck coating beside a backyard pool
Quick facts
ProcessPressure wash, repair, profile, mask, recoat
CoatingSlip-resistant Sherwin-Williams pool deck system
Color adviceLight tans, grays and off-whites stay cooler
LicenseAZ ROC 365464, bonded and insured

Repair, recoat or replace

The right answer depends on the concrete, not the surface. Recoating works when the slab is solid and the old finish is mostly bonded, even if it looks rough. Spot repair plus recoat handles cracks, chips and small hollow areas. Replacement is for decks with large sunken sections, slabs that have heaved, or texture that is coming loose across wide areas.

At the estimate we tap the deck to find hollow spots, look at how the cracks run, and check how well the existing coating holds. You get a straight recommendation for your deck before any work is scheduled.

Signs your Kool Deck needs attention

  • Color has faded to a chalky pink or washed-out beige
  • A powdery film comes off on your hand or feet
  • Hairline cracks running from corners, drains or the coping
  • Chipped or worn-smooth texture in the main walking paths
  • Rust, hard-water or algae stains that no longer wash out
  • Loose or hollow-sounding patches near the pool edge
  • Old paint or sealer peeling off in flakes

Our Kool Deck resurfacing process

  1. Pressure wash and degrease the whole deck to remove chalk, sunscreen, algae and dirt.
  2. Remove loose or failing coating and open up cracks so the repair material bonds.
  3. Patch chips, spalls and low spots and blend them into the surrounding texture.
  4. Lightly grind or etch the surface so the new coating can key into it.
  5. Mask coping, tile, drains, the pool equipment pad and nearby walls.
  6. Apply the slip-resistant Sherwin-Williams coating system in your chosen color.
  7. Walk the deck with you and go over when it can take foot traffic and furniture.
Textured, slip-resistant pool deck coating beside a backyard pool
Textured, slip-resistant pool deck coating beside a backyard pool

Why Arizona pool decks wear out

A West Valley pool deck takes direct sun most of the year and surface temperatures well above the air temperature in summer. UV breaks down the binders in coatings and fades color, which is why decks chalk. Splash-out carries chlorine and salt onto the surface every day, and both wear on coatings over time.

Monsoon storms add sheets of runoff, dust and debris, and the swing from hot afternoons to wet, cooler evenings makes concrete expand and contract. That movement is what opens hairline cracks at corners and along the coping.

Choosing a color that stays cool

Dark coatings soak up heat and can get uncomfortable under bare feet in July. Light tans, soft grays and off-whites reflect more sunlight, and they also hide dust and hard-water spots between cleanings. If your HOA has a say in backyard finishes visible from the street or a common area, check before you pick, and we can provide product and color details for the submittal.

How long it takes

Most residential decks take two to four days to prep and coat, depending on size and how much crack repair is needed. Bare feet can usually go back on it roughly a day after the last coat. Furniture and heavy grills should wait longer, and we give you a return-to-use time based on the product and that week's weather. Fall and spring are the easiest seasons to work in, but we coat in summer by starting early in the day.

What affects the cost

  • Total square footage, including steps, benches and planter edges
  • Number and width of cracks to repair
  • How much loose coating has to come off
  • Hollow or delaminated areas that need rebuilding
  • Amount of coping, tile and equipment to mask
  • Texture and color choices
  • Access for equipment to the backyard

Caring for a resurfaced deck

Rinse the deck with a hose every week or two during swim season to wash off pool chemicals, sunscreen and the dust that settles after windy days. A soft brush and mild cleaner handle most stains. Skip the pressure washer on a high setting, which can wear the texture, and keep muriatic acid and strong pool chemicals off the coating when you treat the water.

Keep sprinklers and downspouts from dumping water on the same spot every day, and move planters now and then so they do not leave rings.

Where we resurface pool decks

Pool owners from Sun City West to Goodyear call us for deck work. Some of the cities we cover:

Photos

Textured, slip-resistant pool deck coating beside a backyard pool
Textured, slip-resistant pool deck coating beside a backyard pool
Driveway finished with a decorative flake coating in front of a garage
Driveway finished with a decorative flake coating in front of a garage

Frequently asked questions

Can you coat over existing Kool Deck?
Yes, as long as the texture is bonded and the concrete under it is sound. We remove anything loose, repair cracks and profile the surface so the new coating grips. Areas that sound hollow get opened up and rebuilt first.
Will the new surface still have texture?
Yes. The slip-resistant system we use keeps a textured surface so feet have grip around the pool and on steps. We show you texture options at the estimate so you can choose how it feels underfoot.
Why are there cracks in my Kool Deck?
Most are the concrete moving with heat and cooling, settling soil or the deck meeting the pool shell. The finish cracks where the slab does. We fill and blend them before recoating, though a crack in a moving slab can show again over time.
How often does a recoated deck need attention?
A coated deck here typically wants a fresh coat somewhere in the three-to-five-year range. The waterline edge and south- and west-facing sections wear first. Recoating before the surface starts flaking keeps the next job simpler.
Do I need to drain the pool?
No. We mask the coping, tile line and drains and keep material out of the water. You will want to keep the pool closed and the deck clear until the coating has cured enough for foot traffic.
Can you match my existing deck color?
We can get close to most common Kool Deck tones, but many owners use a resurface to move to a lighter, cooler color. We bring samples to the estimate so you can see them against your pool tile and house.

Related