Paint color · Sherwin-Williams
Tricorn Black (SW 6258): Using True Black in the Arizona Sun
Published
Tricorn Black (SW 6258) is a true black: deep, clean and essentially neutral, without the brown, blue or green that softer blacks carry. Its LRV is about 3 when calculated from the RGB values, about as low as paint colors go.
In Arizona, black is a precise tool. On a front door, window frames, light fixtures, railings or cabinets it looks sharp and modern. On large sunny surfaces it gets extremely hot and shows wear quickly. This page covers where it works, what to pair it with, and how to keep it looking crisp.
Color swatch: Tricorn Black SW 6258, #2F2F30
| Color | Tricorn Black |
|---|---|
| Code | SW 6258 |
| Hex | #2F2F30 |
| RGB | 47, 47, 48 |
| LRV | About 3 (calculated from the RGB values, not Sherwin-Williams' published figure) |
| Family | True black, essentially neutral |
Tricorn Black's undertone
Its RGB values (47, 47, 48) are almost identical, with blue a single step higher. In practice it reads as a straight black, with no warmth and no obvious coolness.
Because it is so neutral, it takes on its surroundings. Beside warm beige stucco it can look slightly cool; beside blue-grays it looks pure and inky. If you want a black that blends more softly, a softer near-black such as Iron Ore (SW 7069) is the usual comparison.
True black in strong desert sun
Even black looks lighter in hard midday sun, especially in a satin or gloss finish that reflects the sky. In shade and at night it reads as a deep, solid black.
Against white or light gray stucco, black doors and frames create the high-contrast look of modern and modern-farmhouse homes. Against warm tan stucco the contrast is stronger and can feel stark, which is where a warmer dark often fits better.
Heat, fading and an LRV of about 3
Our LRV figure of about 3 is calculated from the RGB values; Sherwin-Williams publishes its own number on the color page. Nearly all visible light is absorbed, so a black door or panel in direct summer sun can get too hot to touch comfortably.
Black also shows UV wear and chalking sooner than other colors, as a gray, dusty cast on the sunniest faces. Regular gentle washing helps, and doors and frames in full sun should be expected to need recoating more often than the body of the house.
Black front doors, frames and fixtures
A black front door, especially under a covered entry, is a classic look that suits nearly any body color. Window frames, garage door trim, fascia and exterior light fixtures in black give a crisp outline to a light house.
Exterior metal such as railings and gates needs rust treated and a metal primer before a black topcoat. Before painting vinyl windows or doors black, confirm with the manufacturer, because black absorbs enough heat to warp some vinyl products.
Tricorn Black indoors
Inside, black works on interior doors, stair railings, window trim, kitchen islands, cabinets and fireplace surrounds. A black accent wall in a dining room or office can look dramatic and gallery-like with good lighting.
Black interior surfaces show dust, scuffs and brush marks more than lighter colors, so surface prep and even application matter. A full black room works best where it is a deliberate, moody choice.

Where Tricorn Black belongs
- Front doors, especially recessed or covered ones
- Window frames, fascia, light fixtures, railings and house numbers
- Interior doors, stair railings and kitchen islands
- Accent walls in dining rooms, offices and powder rooms
- Not a full exterior body color in Arizona sun
Pairings for Tricorn Black
- Extra White (SW 7006) or Pure White (SW 7005) for sharp, high-contrast trim and walls
- A light gray stucco body such as Passive (SW 7064) or Silver Strand (SW 7057) for a modern look
- Natural Linen (SW 9109) or Alabaster (SW 7008) for a softer, warmer contrast
- Peppercorn (SW 7674) as a charcoal step between the body and black details
Sheen and paint for a crisp black
Exterior black goes on in Sherwin-Williams Emerald Exterior, with Loxon masonry primer on any bare or patched stucco and two coats sprayed and back-rolled where stucco is involved. On a front door, satin or semi-gloss gives a finished look; high gloss is striking but shows every imperfection in the door.
Black cabinets, railings and interior doors get low-VOC Emerald Interior in satin or semi-gloss, applied over careful sanding and priming so brush marks do not show.
Testing Tricorn Black
- Compare it with a softer black or charcoal on a board to decide how stark you want it.
- Hold it in the doorway or against the window frame in sun and in shade.
- Check the contrast with your body color and trim from the street, not just up close.
- If you live under an HOA, confirm that black doors, frames or trim are approved first.
Frequently asked questions
- Is Tricorn Black a true black?
- Yes. Its RGB values are nearly equal, so it reads as a clean, neutral black without obvious brown or blue.
- Is a black front door a good idea in Arizona?
- It looks great, especially on a covered entry. A door in full afternoon sun will get very hot and may need recoating sooner than a shaded one.
- What is the difference between Tricorn Black and Iron Ore?
- Tricorn Black is deeper and more neutral, with a calculated LRV of about 3. Iron Ore (SW 7069) is a softer near-black at about 6 with a slight warmth.
- Can I paint vinyl window frames Tricorn Black?
- Only if the manufacturer allows dark colors. Black absorbs enough heat to warp some vinyl, and painting outside the maker's guidance can affect the window warranty.
- What sheen should a black front door be?
- Satin or semi-gloss is a good balance of durability and appearance. High gloss looks dramatic but highlights every dent and brush mark.
- Does Tricorn Black fade in the sun?
- Black shows UV wear and chalking sooner than lighter colors, often as a grayish cast. Washing and periodic recoating keep it crisp.
- What body color goes with black trim?
- Clean whites and light grays give the highest contrast. For a softer look, a warm light neutral like Natural Linen (SW 9109) works well.