Orange Coatings LLC · (602) 932-3417 · Get an estimate

Community · Alamar, Avondale

House Painting in Alamar, Avondale AZ

Published

Most houses in Alamar went up in 2019 or later, so the painting most owners need first is inside: replacing flat builder paint, adding color, and coating the garage floor. If you want a different exterior color, read your association's current guidelines before you pick one, because we can't confirm the community's color rules and a master plan this size may well have them.

Orange Coatings is a licensed, bonded and insured painting contractor (ROC 365464) based in Surprise. We come out the same day you call for an in-person estimate and leave a written quote for interior painting, exterior repaints, epoxy garage floors, pool decks and driveway coatings.

Entrance to Avondale, Arizona
Entrance to Avondale, Arizona Photo: Marine 69-71, CC BY-SA 4.0, via Wikimedia Commons (resized)
Quick facts
WhereSouthwest Avondale in the Sierra Estrella foothills, under 4 miles south of I-10 (11750 W. Broadway Rd.)
ZIP code85323
Master developerBrookfield Residential, in a joint venture with North America Sekisui House
BuildersSeveral third-party home builders
ConstructionBegan in 2019 and still under way
Size1,150 acres, up to 3,695 homesites planned
Paint approvalNot confirmed; check your association's current guidelines before changing colors

About Alamar

Alamar is a 1,150-acre master plan in the southwest corner of Avondale, set against the Sierra Estrella foothills and less than four miles south of Interstate 10. Brookfield Residential broke ground in 2019 as master developer, in a joint venture with North America Sekisui House, and a group of outside builders put up the houses.

The plan allows for as many as 3,695 homesites. Plans call for about 20 neighborhood parks and three larger community parks tied together by trails, plus a private pool and Lakin Prep Academy, an elementary school inside the community. Because building is still going on, some streets are finished and occupied while others are still being framed.

What Alamar homes are like, and what that means for paint

Every house here is young, which means the paint on nearly all of them is still the builder's original coat. Builders pick finishes that pass inspection and keep the closing schedule on track. Inside, that often means a flat wall paint that shows scuffs and smudges and doesn't take scrubbing well, which is why so many new owners repaint kitchens, hallways and kids' rooms within the first couple of years.

A new house also moves a little as framing dries and the slab settles. These are the things we usually find on a first visit to a recently built home:

  • Flat builder paint in high-traffic rooms that marks easily and won't wipe clean
  • Nail pops and hairline cracks at drywall corners and above door frames
  • Bare concrete garage floors already picking up oil drips and hot-tire marks
  • Caulk joints around exterior windows and trim beginning to separate in the heat

Exterior colors and HOA review in Alamar

We don't have a published paint palette or design review process for this community on file, so we won't guess at its rules. Large master-planned communities in the Phoenix area usually control exterior colors through their governing documents, so treat any change to the outside of the house as something to confirm before money is spent.

  1. Look through the documents you received at closing for architectural or design guidelines.
  2. Ask the community's management office whether exterior colors need approval and whether an approved palette exists.
  3. If there is a palette, send us the scheme names or color codes. We match them to Sherwin-Williams colors and give you a color sheet ready to submit.
  4. Schedule the exterior work only after any required approval is in writing.

What we paint in Alamar

  • Interior walls, ceilings, doors and trim in Sherwin-Williams Emerald Interior, a low-VOC coating
  • Accent walls and color changes for owners ready to move past builder beige
  • Epoxy garage floors from Sherwin-Williams floor systems, with optional decorative flakes, a clear topcoat and an anti-slip additive
  • Pool deck coatings and decorative driveway coatings
  • Exterior stucco repaints with Loxon primer on bare or patched spots and two coats of Emerald Exterior, sprayed and back-rolled
Garage floor finished with a decorative flake epoxy coating and clear topcoat
Garage floor finished with a decorative flake epoxy coating and clear topcoat

Replacing builder paint: sheen matters as much as color

When owners repaint soon after moving in, the biggest improvement is often the sheen rather than the color. For living areas and hallways we usually suggest eggshell or satin so the walls can be wiped down. Bathrooms and kitchen walls do better in satin or semi-gloss, and ceilings stay flat, where the low sheen hides roller laps and glare from light fixtures.

Before finish coats go on, we patch nail pops and corner cracks and spot-prime the repairs so they don't flash through the new paint. If you are living in the house during the work, Emerald Interior's low-VOC formula keeps the smell down, and we mask floors, fixtures and furniture before anything is opened.

Planning a project in Alamar

Exterior paint cures best between about 50 and 90 degrees, so October through April is the easy window; summer exterior jobs start early in the morning. For a garage floor, plan to park outside until the coating has cured for the time on the product label.

  1. Call (602) 932-3417 or send a quote request with a short description of the rooms or surfaces.
  2. Noah or one of our estimators walks the house the same day, looks at each surface and leaves a written quote.
  3. We set a start date and finalize colors and Sherwin-Williams products with you.
  4. The crew masks, preps and paints to the product specs, with daily progress updates.
  5. We walk through the finished work with you and handle touch-ups before calling it done.

Other Avondale communities we work in

Alamar is the newest of the Avondale master plans we cover. North of it, the city's older subdivisions from the 1990s and 2000s are now into their second or third exterior repaint, which is a different kind of job.

Photos

Empty bedroom with a ceiling fan and floors covered in plastic before interior painting
Empty bedroom with a ceiling fan and floors covered in plastic before interior painting

Frequently asked questions

Do I need approval to repaint the outside of my Alamar home?
We can't confirm the rules, so check your association's current guidelines and ask the management office before changing exterior colors. If an approved palette exists, we match your pick to Sherwin-Williams codes and prepare a color sheet for your submittal.
Is it too early to repaint a house built in the last few years?
The outside usually doesn't need it yet, but interiors often do, because builder paint tends to scuff and resist cleaning. At the estimate we look at both and tell you honestly what can wait.
Can you coat the garage floor in a new Alamar house?
Yes. We check the slab at the estimate, clean and prepare it, then apply a Sherwin-Williams epoxy floor system. You can add decorative flakes, a clear topcoat and an anti-slip additive.
Several builders work in Alamar. Does that change how you paint?
Floor plans, trim details and textures differ from builder to builder, but our prep and products stay the same. Each quote is written for the actual walls, trim and condition of your house.
Where is Orange Coatings based, and do you come out to Alamar?
Our shop is at 18428 West Bridger Street in Surprise, and Avondale is one of the cities we serve, Alamar included. Call (602) 932-3417 and we will book a time to walk your house.

Related

Sources