Paint color · Dark green-gray
Homburg Gray (SW 7622): Dark Green-Gray for Trim, Doors and Bodies
Published
Homburg Gray (SW 7622) is a dark gray from Sherwin-Williams with a muted green undertone that keeps it from looking flat or cold. Its LRV is about 15, calculated from the RGB values, so in Arizona it is best on trim, doors, shutters and accent areas, with full-body use saved for homes that can accept more heat and quicker fading.
It is a softer alternative to near-black trim, with enough color in it to sit comfortably beside desert plants and warm stucco.
Color swatch: Homburg Gray SW 7622, #666D69
| Color | Homburg Gray |
|---|---|
| Code | SW 7622 |
| Hex | #666D69 |
| RGB | 102, 109, 105 |
| LRV | About 14.8 (calculated from the RGB values) |
| Color family | Dark gray with a green undertone |
What is Homburg Gray's undertone?
Its RGB values are 102, 109 and 105. Green is highest, red lowest and blue in the middle, which gives a cool-leaning gray with a slight spruce cast. It is less green than Pewter Green (SW 6208) and more colorful than a near-neutral charcoal like Grizzle Gray (SW 7068).
Because blue sits above red, Homburg Gray's green reads cooler than Pewter Green's olive tone. In shade it looks like a deep slate-green; in bright sun it reads more as a medium gray.
Homburg Gray in Arizona sun and in north rooms
On a sunlit stucco wall, Homburg Gray lightens to a medium gray-green and the texture shows clearly. On the shaded side it reads close to charcoal with a hint of green. A door recessed in a deep entry will look darker than the chip all day long.
Inside, north light strengthens the cool green-gray tone, and a whole north room in this color can feel like a forest-shade den, which some people want. Warm lamps bring out an earthier, more olive look. It pairs well with wood paneling, leather and brass.

Where Homburg Gray fits
- Front doors and garage side doors on light or warm stucco
- Fascia, window trim and shutters on an off-white or light gray body
- Full body color on houses with deep overhangs or mature shade trees
- Kitchen islands, cabinets and built-in bookcases
- Interior accent walls in offices, dens and dining rooms
Pairings for Homburg Gray
Sherwin-Williams lists Eider White (SW 7014) as a coordinating color for Homburg Gray, along with SW 6112 and SW 6116. Eider White is a soft white with an LRV of about 73 that keeps the contrast from looking harsh.
- Soft white for body or trim: Eider White (SW 7014)
- Light gray body under Homburg Gray trim: On the Rocks (SW 7671)
- Warm tan body under Homburg Gray trim: Ramie (SW 6156)
- Lighter gray-green companion on the same house: Oyster Bay (SW 6206)
LRV of about 15: heat and fade
Homburg Gray reflects only around 15 percent of visible light, so sunlit surfaces in this color run hot. On a west-facing front door or a full stucco body in open sun, that heat speeds up wear on the paint film and puts more strain on caulk joints.
Muted gray-greens usually fade toward a lighter, chalkier gray. Because Homburg Gray is already subdued, a small amount of fade is less obvious than on a bright green, but the south and west faces will still change first.
Homburg Gray versus black trim
Many homeowners consider black for fascia and window trim. Homburg Gray gives a similar framed look with gentler contrast and a little less heat gain, and it shows dust and pollen less than true black.
Against dark bronze window frames, Homburg Gray trim can look noticeably green, so test the pairing on the wall. With white or almond windows, it looks crisp and deliberate.
Homburg Gray on garage doors and metal
A two-car garage door is often the largest single surface facing the street, and on many West Valley lots it faces south or west. Painting it Homburg Gray makes a strong statement, but a steel door in this color gets very hot in summer, and heat can make some insulated doors bow or stress their panels. If the garage door gets afternoon sun, we would usually suggest the body color or a lighter gray there and keep Homburg Gray for the entry door and trim.
On wrought iron, gates and railings, it is a good substitute for black: it hides dust, still looks dark from the street, and complements desert plants. Any rust needs to come off and be spot-primed first.
Sheen and product for a deep gray
Outside, we use Sherwin-Williams Emerald Exterior, two coats sprayed and back-rolled on stucco, with Loxon masonry primer on bare or patched areas. Trim and doors take satin or semi-gloss well, while stucco body walls look best flat.
Deep colors are mixed in a deep tint base, and going from a light existing color to Homburg Gray may need more than two coats or a gray-tinted primer for full, even coverage. Inside, satin is a good choice for cabinets and doors, eggshell for walls. Save leftover paint, because dark colors reveal mismatched touch-ups.
Testing Homburg Gray
- Paint two coats of Homburg Gray onto a large sample board.
- Hold it at the actual door or trim location, in its real light.
- Compare it beside your window frames, roof and body color.
- Check whether your HOA allows dark trim or door colors before ordering.
Frequently asked questions
- Is Homburg Gray green?
- It is a dark gray with a muted green cast. The green shows more in shade and north light; in sun it looks more gray.
- Is Homburg Gray a good front door color?
- Yes, it gives a strong, earthy contrast on light stucco. A door in full afternoon sun will get hot and need refreshing sooner than one under a porch.
- What white pairs with Homburg Gray?
- Eider White (SW 7014), a Sherwin-Williams coordinating color, is a soft trim or body white. A brighter white sharpens the contrast if you want a more modern look.
- Can Homburg Gray be used as a whole-house exterior color in Arizona?
- It can, but at an LRV of about 15 walls absorb a lot of heat and fade faster. It works best on shaded homes or as trim and accents.
- How does Homburg Gray compare with Grizzle Gray?
- Grizzle Gray (SW 7068) is about as dark but more neutral. Homburg Gray carries more green.
- Is Homburg Gray good for cabinets?
- Yes, especially islands and lowers with brass or black hardware. A satin or semi-gloss sheen keeps them cleanable.